Abstract:Black orthorhombic (B-γ) CsSnI3 with low toxicity and excellent optoelectronic properties is a promising candidate for perovskite solar cell (PSC). However, the performance of the B-γ CsSnI3-based PSCs is much lower than their lead-based or organotin-based counterparts due to the heavy self-doping of Sn2+ to form Sn4+ under ambient-air conditions. Here, this undesirable oxidation in CsSnI3 is restricted by engineering the localized electron density with phthalimide (PTM) additive. The lone electron pairs of NH and two CO units of PTM are designed to form trigeminal coordination bonding with Sn2+, resulting in reduced defect density and relatively grain-ordered perovskite film. The champion efficiencies of 10.1% and 9.6% are obtained for the modified rigid and flexible B-γ CsSnI3-based PSCs, respectively. These encapsulated devices maintain 94.3%, 83.4%, and 81.3% of their initial efficiencies under inert (60 days), ambient (45 days), and 1 Sun continuous illumination at ∼70 °C (2000 min) conditions, respectively.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.1c00342?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.1c00342</a>.Experimental section, SEM, UV–vis spectrum, Tauc plot of optical absorption, PL/TRPL, XRD, TEM, HAADF-STEM, EDS, NMR, FTIR, XPS, device performance, SCLC, EIS, images, water contact angle, simulated crystal details, DFT simulation results (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.1c00342/suppl_file/nz1c00342_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

B-site Doping with Bismuth Ion Enhances the Efficiency and Stability of Inorganic CsSnI3 Perovskite Solar Cell

Enhancing Electron Extraction and Transport in Inorganic Perovskite Solar Cells Via Additional Built-in Potential of SnO2-BiFeO3 Nano-Heterostructure

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Bi and Sn Doping Improved the Structural, Optical and Photovoltaic Properties of MAPbI3-Based Perovskite Solar Cells

Enhancing the performance of CsPbIBr2 solar cells through zinc halides doping

Antimony Doping of CsBi 3 I 10 for Tailoring the Film Morphology and Defects toward Efficient Lead-Free Thin-Film Solar Cells

A Bifunctional Carbazide Additive For Durable CSSNI3 Perovskite Solar Cells

Improving the Stability and Optoelectronic Properties of All Inorganic Less-Pb Perovskites by B-Site Doping for High-Performance Inorganic Perovskite Solar Cells

Improving the Stability and Optoelectronic Properties of All Inorganic Less‐Pb Perovskites by B‐Site Doping for High‐Performance Inorganic Perovskite Solar Cells

Tuning the Optoelectronic Property of All-Inorganic Lead-Free Perovskite via Finely Microstructural Modulation for Photovoltaics

Antimony Doped CsPbI 2 Br for High-Stability All-Inorganic Perovskite Solar Cells

B‐Site Co‐Doping Coupled with Additive Passivation Pushes the Efficiency of Pb–Sn Mixed Inorganic Perovskite Solar Cells to Over 17%

Localized Electron Density Engineering for Stabilized B-γ CsSnI 3 -Based Perovskite Solar Cells with Efficiencies >10%

Zinc and Acetate Co-doping for Stable Carbon-Based CsPbIBr 2 Solar Cells with Efficiency over 10.6%

Surface Sn(IV) Hydrolysis Improves Inorganic Sn–Pb Perovskite Solar Cells

Fully Inorganic CsSnI3 Mesoporous Perovskite Solar Cells with High Efficiency and Stability Via Coadditive Engineering

Enhancement of thermal stability for perovskite solar cells through cesium doping

Improvement of Cs2AgBiBr6 Double Perovskite Solar Cell by Rubidium Doping

Zinc ion functional doping for all-inorganic planar CsPbIBr 2 perovskite solar cells with efficiency over 10.5%

Potassium Iodide-Modified Lead-Free Cs3Bi2I9 Perovskites for Enhanced High-Efficiency Solar Cells

Over 12% efficient CsSnI 3 perovskite solar cells enabled by surface post-treatment with bi-functional polar molecules