Abstract:The near stoichiometric SiC fiber has been reported to play significant roles in the application of aero‐engine field. An in‐depth understanding on the degradation mechanism of the fiber during its corrosion in air and under a simulated aeroengine environment (PH2O: PO2: PAr = 14:8:78 kPa) will shine a light on the performance evaluations of the near stoichiometric SiC fiber‐based materials as well as the development of their potential applications. In this study, .XRD, SEM, and FIB‐TEM were utilized to analyze the mechanical properties and microstructure of the fiber. After oxidation in dry air and Ar‐H2O‐O2 for 1h, respectively the fiber strength retention rate has been found to decreases with the increased oxidation temperature. The raise in oxidation temperature also led to the increasing of the thickness and the crystallization rate of the oxide scale. The most different oxidation behavior of SiC being treated under the simulated environment than in air is the lower oxidation activation energy and the higher crystallization activation energy for cristobalite. Water vapor can promote the oxidation reaction and inhibit the crystallization of cristobalite in the oxide scale. Few significant differences have been observed otherwise in the oxidation process and oxidation chromatography crystallization mechanism of fibers being treated under different conditions.. The increase of oxide layer thickness and the formation of cristobalite impair the structural integrity and compactness of the oxide scale and thus leads to the deterioration of the mechanical properties of SiC fibers. Therefore, it is proposed that oxidation resistance of SiC fiber can be improved by insulating the reaction between the oxidizing agents and the SiC fiber, or by increasing the crystallization temperature of cristobalite in the oxidation process and reducing the crystallization rate. This article is protected by copyright. All rights reserved

Oxidation behaviors of yttrium silicate modified SiCf/SiC composites in air and water‐oxygen environments

The impact of water and oxygen contents on the corrosion performance of yttrium silicate modified SiC f /SiC composites under high temperature conditions

Enhanced wet-oxidation resistance of Y2O3 modified SiC ceramics by the formation of Y2Si2O7 protective layer

Microstructure and oxidation behavior of SiOC coatings on C/C composites co-deposited with HMDS and TEOS by using CVD process

Y/YbB4-modified SiCf/SiC composites with enhanced water-oxygen corrosion resistance

Oxidation Behavior of SiCf/SiC Composites Modified by Layered-Y2Si2O7 in Wet Oxygen Environment

Preparation and properties of SiC/SiC-SiYC with excellent water-oxygen corrosion resistance

Recent progress on wet-oxygen corrosion resistance of SiC f /SiC composites

A Novel Strategy to Improve the Corrosion Resistance of Sicf/Sic Composites in High-Temperature Combustion Environments by Cooperation of Self-Healing Sibcn and High-Stability Yb2si2o7

The Oxidation Behavior and Corrosion Mechanism of SiC Matrix Ceramics in a High Temperature Wet Air Environment

Oxidation Behavior of SiC/SiC Composites in Air at High Temperature

The Comparative Investigation of Oxidation Behavior and Corrosion Mechanisms of SiC Matrix Ceramics under Different Atmospheres

Degradation mechanism of near stoichiometric SiC fibers after air and Ar‐H2O‐O2 corrosion at 1000∼1500°C

Microstructural and mechanical evolution of SiCf/SiC composites in wet oxygen atmosphere above 1000 degrees C

Fabrication and oxidation resistance of mullite/yttrium silicate multilayer coatings on C/SiC composites

Oxidation behavior of SiC‐AlN ceramics exposed to dry oxygen and water oxygen environments at 1100–1300°C

Wet Oxidation Behavior of Al-Y Synergistic Modified Liquid Phase Sintered SiC

Wet oxidation behavior of C/SiC–SiHf(B)CN composites at high temperature

Oxidation properties of tri-layer ytterbium-disilicate/mullite/silicon-carbide environment barrier coatings for Cf/SiC composites

Comparison of Oxidation Behaviors of 3D C/PyC/SiC and SiC/PyC/SiC Composites in an O2-Ar Atmosphere

Oxidation resistance of SiCf/SiC composites with a PyC/SiC multilayer interface at 500 °C to 1100°C