Abstract:Oxidation resistance of titanium aluminide (TiAl) based alloys is a fundamental aspect for the high-temperature structural applications such as in the advanced hypersonic aircraft engines and gas turbines. The aim of this study was to identify oxidation kinetics and mechanisms through detailed microstructural characterization of a newly-developed Ti-44Al-4Nb-1.5Cr-0.5Mo-0.1B-0.1Y alloy via focused ion beam (FIB), transmission electron microscopy (TEM), X-ray diffraction (XRD), electron probe microanalysis (EPMA), scanning transmission electron microscopy (STEM), along with density functional theory (DFT) calculations. The alloy consisting mainly of γ-TiAl/α2-Ti3Al lamellar structure exhibited a superior oxidation resistance at 700 °C, and followed parabolic oxidation kinetics at 800 °C and 900 °C. The observed multi-layered scale structure consisted of TiO2, Al2O3-rich, Al2O3+TiO2, H-Ti2AlN+Al2O3+α2-Ti3Al, Z-Ti5Al3O2+AlNb2+Laves-(Ti,Nb)Cr2, and H-Ti2AlN/α2-Ti3Al lamellae from the outside to inside after high-temperature oxidation. The γ-TiAl/α2-Ti3Al lamellae near the scale/substrate interface were first transformed into H-Ti2AlN/α2-Ti3Al lamellae, with orientation relationships identified as ( 0001 ) α 2 / / ( 0001 ) T i 2 A l N , ( 10 1 ¯ 0 ) α 2 / / ( 10 1 ¯ 0 ) T i 2 A l N and [ 1 2 ¯ 10 ] α 2 / / [ 1 2 ¯ 10 ] T i 2 A l N . The H-Ti2AlN/α2-Ti3Al lamellae were then transformed into a metastable Z-Ti5Al3O2 phase at the scale/substrate interface. The Z-phase was decomposed to Ti3Al and Al2O3 as the scale/substrate interface moved inwardly. Ti3Al reacted further with oxygen and nitrogen to form Ti2AlN, which was finally oxidized to form TiO2 and α-Al2O3. A Nb-rich layer was present beneath the scale along with the formation of AlNb2 and Laves phase, and the doping effect of Nb to suppress the diffusion of oxygen occurred mainly in the TiO2+Al2O3 compound layer. The results obtained in this study would pave the way for the development of advanced oxidation-resistant TiAl-based materials for high-temperature applications.

Effect of minor Sc modification on the high-temperature oxidation behavior of near-α Ti alloy

Effect of Oxidation Time on the Structure and Properties of Ti-25Nb-3Zr-2Sn-3Mo Titanium Alloy Microarc Oxide Film Layer

Effects of Microstructure and Rare-Earth Constituent on the Oxidation Behavior of Ti–5.6Al–4.8Sn–2Zr–1Mo–0.35Si–0.7Nd Titanium Alloy

Insight into the role of Sc on microstructure, mechanical properties and high temperature oxidation resistance of NiCoCrAlSiSc alloys

Effect of scandium on microstructure and mechanical properties of high zinc concentration aluminum alloys

The Effects of Alloying Elements Cr, Al, and Si on Oxidation Behaviors of Ni-Based Superalloys

Non-Isothermal Oxidation Behavior and Mechanism of a High Temperature Near-α Titanium Alloy

Effect of Sc on the water vapor oxidation behavior of FeCrAl alloys at 1000 °C

Effect of Scandium on Grain refinement mechanism and Mechanical Properties of Al-7Si-0.6Mg alloy at Different Cooling Rates

High-throughput experiment-assisted study of the alloying effects on oxidation of Nb-based alloys

Effect of Minor Sc Addition on the Microstructure Evolution of Al–Cu–Li–Mg Alloy During Homogenization with Different Cooling Modes

Microstructural evolution and high-temperature oxidation mechanisms of a titanium aluminide based alloy

Effects of Sc Addition and Aging on Microstructure and Martensitic Transformation of Ni-rich NiTiHfSc High Temperature Shape Memory Alloys

Effect of minor Sc additions on precipitation and mechanical properties of a new Al-Cu-Li alloy under T8 temper

Effect of microalloying with silicon on high temperature oxidation resistance of novel refractory high-entropy alloy Ta-Mo-Cr-Ti-Al

Microstructures evolution and mechanical properties disparity in 2070 Al-Li alloy with minor Sc addition

Influence of minor Sc additions on grain refinement and microstructure characteristics of a high Zn-containing Al-Zn-Mg-Cu-Zr alloy

Effects of Al/Si on the oxidation behavior of a TiZrV0.5Nb0.5 refractory high entropy alloy at 1000 °C

Theoretical Study on the Effects of Alloying Elements on Oxygen-Adsorption Properties of the Ti 2 AlNb Surface

Microstructure and Martensitic Transformation of NiTiHfSc High Temperature Shape Memory Alloys

Effect mechanism of Sc addition and T6 heat treatment on precipitated phase and mechanical properties of Al‐Cu‐Mn alloy