Abstract:Microalloying has long been recognized as an effective method for improving the mechanical properties of metallic materials and developing new ones. In this study, we comprehensively investigate the effects of Sc addition on the microstructural evolution and mechanical performance of nickel-based superalloys using a combination approach of the experiment, first-principles calculation, and multiscale modeling. The results show that Sc addition simultaneously improves the yield strength increasing from 1068 MPa to 1172 MPa (9.7%) and elongation increasing from 13.4% to 19.7% (47%). The microstructural characterizations reveal that Sc addition refines the grain size, increases the volume fraction of primary precipitate, induces the coarsening of secondary precipitates, and produces a new type of Sc-rich particle. First-principles calculations from the atom probe tomography experiment show that the anti-phase boundary energy of secondary precipitate is significantly increased in Sc-containing superalloys. A modified alloying-dependent yield strength model is developed by considering the multimodal precipitate size distribution and microstructure evolution obtained from experiments and atomic simulations. The increased yield strength originates from not only the Sc addition induced increased volume fraction of primary precipitate at grain boundary to enhance grain boundary strengthening, but also Sc addition induced increased anti-phase boundary energy of secondary precipitate to improve the precipitate strengthening. The increased elongation depends on the fact that the Sc element has a good affinity to deleterious elements and forms Sc-rich particle and oxygen-rich precipitate to enhance grain boundary strength. This work integrating multiscale modeling and experiment can be denoted as a universal framework to study the influence of alloy element on the microstructure and properties, which gives guiding significance to screen and design high-performance superalloys.

Insight into the role of Sc on microstructure, mechanical properties and high temperature oxidation resistance of NiCoCrAlSiSc alloys

The Effects of Alloying Elements Cr, Al, and Si on Oxidation Behaviors of Ni-Based Superalloys

Effects of Sc addition on microstructure, phase evolution and mechanical properties of Al0.2CoCrFeNi high-entropy alloys

Oxidation behavior of AlCoCrFeNiSi high-entropy alloys at 1100 °C

Effect of Sc on the water vapor oxidation behavior of FeCrAl alloys at 1000 °C

Microstructural Evolution and Mechanical Properties of Al0.3CoCrFeNiSix. High-Entropy Alloys Containing Coherent Nanometer-Scaled Precipitates

Microstructure and Mechanical Properties of Al–Si–Mg–Cu–Ti Alloy with Trace Amounts of Scandium

Insights into the oxidation behavior of Ni-25Cr-10Fe-<i>x</i>Si (<i>x</i>=1, 2, 3, 4 wt%) alloys at 1000C in ambient air

Contribution of Sc Doping to the Growth and Adhesion of Alumina Scale on AlCoCrFeNi High-Entropy Alloy

Study on the high-temperature oxidation of AlCrFeCoNi-based high-entropy alloys with trace Si additions

Microstructure and mechanical properties of the alloys NiAl and NiAl-28Cr-6Modoped with rare-earth Sc

Effect of minor Sc modification on the high-temperature oxidation behavior of near-α Ti alloy

Influence of Sc Content on the Microstructure and Mechanical Properties of Cast Al-2Li-2Cu-0.5Mg-0.2Zr Alloy

Influences of Al content on oxidation behavior of CoNiCrAlYRe alloys

Influence of the interaction between Si and Sc on the microstructure and tensile properties of as casted Al-Si-Sc alloys

Effect of Sc Microalloying Addition on Microstructure and Mechanical Properties of As-Cast Al–12Si Alloy

High Temperature Oxidation Resistance and Degradation Mechanism of Al-Si Coatings on Nickel-Based Superalloy at 1000.

Effects of Ni and Cr on the high-temperature oxidation behavior and mechanisms of Co- and CoNi-base superalloys

Influence of scandium addition on microstructure and mechanical properties in nickel-based superalloys: An integrated multiscale modeling and experimental approach

New insights in the oxidation behavior of (FeCoCrNi)94Al4Ti2Si high entropy alloys at 1100 °C

The influence of Sc solute partitioning on the microalloying effect and mechanical properties of Al-Cu alloys with minor Sc addition