Study on the Load-Bearing Characteristics Analysis Model of Non-Pneumatic Tire with Composite Spokes

Muyang Sun,Weidong Liu,Qiushi Zhang,Yuxi Chen,Jianshan Jiang,Xiaotong Liu
DOI: https://doi.org/10.3390/machines12060358
IF: 2.899
2024-05-23
Machines
Abstract:This study aims to analyze the load-bearing characteristics of non-pneumatic tires with composite spokes using experimental and finite element simulation methods and to establish a mechanical analysis model based on the Timoshenko beam theory. Subsequently, experiments were conducted on carbon fiber-reinforced plastics and rubbers to establish the corresponding constitutive model. A finite element model of the non-pneumatic tires with composite spokes was also developed. The main structural and material parameters were selected, and their correlation with the vertical stiffness of the non-pneumatic tires with composite spokes was studied using response surface methodology. The stiffness characteristics of the composite spokes were simplified, and a load-bearing characteristic analysis model was established. The results indicated that among the parameters of the reinforcement plate structure and rubber, the constitutive parameter C10 of the rubber in the spokes had the greatest impact, with a comprehensive influence value of 319.83 N/mm. Under a load of 5000 N, the load-bearing characteristic analysis model results were consistent with those of the finite element simulation, with a maximum relative error of 7.49%. The proposed load-bearing characteristic analysis model can assist in the rapid design and performance prediction of non-pneumatic tires with composite spokes.
engineering, mechanical, electrical & electronic
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to analyze the load - bearing characteristics of composite spokes in non - pneumatic tires (NPT). Specifically, the research objective is to analyze the load - bearing characteristics of these tires through experimental and finite - element simulation methods, and establish a mechanical analysis model based on Timoshenko beam theory. In addition, the paper also explores the influence of different structural and material parameters on the vertical stiffness of non - pneumatic tires, and conducts a sensitivity analysis through the response surface method (Response Surface Methodology, RSM). Ultimately, the research aims to propose a load - bearing characteristic analysis model that can quickly design and predict the performance of non - pneumatic tires. ### Main research contents and methods: 1. **Experimental part**: - Mechanical property tests were carried out on carbon fiber - reinforced plastics (CFRP) and rubber materials, and the anisotropic constitutive parameters and hyperelastic constitutive model parameters of these materials were determined. - The experiments included quasi - static tensile and compressive tests, as well as strain measurement by a non - contact full - field strain measurement system (Vic - 3D). 2. **Finite - element model**: - A three - dimensional finite - element model (FE model) of a non - pneumatic tire with CFRP reinforcing plates was established, and simulation was carried out using Abaqus software. - The neo - Hookean constitutive model was used to describe the behavior of rubber in the material characteristics of the model, and the anisotropic characteristics of CFRP materials were considered. 3. **Model verification**: - The accuracy of the finite - element model was verified by experimental data, especially the load - bearing characteristics under a 5,000 N load. - The results show that the maximum relative error of the model is 7.49%, indicating that the model has high accuracy. 4. **Parameter analysis**: - The influence of different structural and material parameters on the vertical stiffness of non - pneumatic tires was studied using the response surface method (RSM). - It was found that the constitutive parameter \( C_{10} \) of the rubber material in the spokes has the greatest influence on the vertical stiffness of the tire, and the comprehensive influence value is 319.83 N/mm. ### Research significance: - The proposed load - bearing characteristic analysis model can calculate the load - bearing capacity of non - pneumatic tires efficiently and accurately, which is helpful for quickly designing and optimizing the structural dimensions and material parameters of tires. - This research provides a theoretical basis and technical support for the design and performance prediction of non - pneumatic tires, especially in the application of composite materials. ### Key formulas: - **neo - Hookean constitutive model**: \[ U = C_{10} (I_1 - 3) + \frac{1}{D_1} (J - 1)^2 \] where: - \( J \) represents the elastic volume ratio. - \( I_1 \) describes the distortion degree of the material. - \( C_{10} \) and \( D_1 \) respectively describe the shear characteristics and compressibility of the material. Through these studies, the paper provides important theoretical basis and practical tools for the design and performance optimization of non - pneumatic tires.