Abstract:A high load capacity non-pneumatic tire (HC tire) was designed and manufactured to solve the problems of air leakage, puncture, blowout, shoulder void, and delamination, which occur in traditional high load capacity tires, as well as significantly increase the unit load of tires. Experiments and numerical simulations were conducted to investigate the static stiffness properties of the HC tire. Additionally, the manufacturing process of the tire was highlighted. The tire mainly comprised polyurethane and silicon manganese steel, and a 'π'-shaped support substructure was adopted. The tread structure was made up of a built-in spiral steel ring and a non-steel ring. The uniaxial tensile mechanical properties of the used metal and elastomer materials were tested, and the linear elastic constitutive model and Marlow constitutive model, respectively, were used to describe their mechanical characteristics. The stiffness properties of the HC tire, including torsional, longitudinal, vertical, and lateral stiffnesses, were evaluated using a tire comprehensive stiffness tester. Nonlinear finite element models of the HC tire were established, and their accuracies were verified through vertical stiffness tests. The stiffness properties of the HC tire in other directions were simulated as well. An in-depth comparative analysis of the simulation and experimental data was performed. The results demonstrated that the unit load of the unreinforced HC tire was 2.972 times and 1.615 times higher than that of the solid tire and pneumatic tire, respectively. The spiral steel ring embedded in the tread increased the vertical and longitudinal stiffness but reduced the torsional stiffness of the HC tire, thus reversing the variation trend of the lateral stiffness at the 0° and 5° test points. The findings can serve as a reference for theoretical research on, and the structural optimization of, non-pneumatic tires with a high load capacity.

Influence of Spoke Parameters on Load Capacity of Non-Pneumatic Tires Using Orthogonal Study and Analysis of Variance

The Influence of Tire Inflation Pressure on the Stress Distribution of Motorcycle Wheels

Study on the Load-Bearing Characteristics Analysis Model of Non-Pneumatic Tire with Composite Spokes

Study on the Design Method of Equal Strength Rim Based on Stress and Fatigue Analysis Using Finite Element Method

ANALYSIS STUDY ON BENDING FATIGUE TEST OF AUTOMOBILE WHEELS

Effect of Spoke Design and Material Nonlinearity on Non-Pneumatic Tire Stiffness and Durability Performance

Materials Selection and Structural Analysis of Plastic Tire with Wheel Spokes

Topology optimization of wheel spoke under fatigue tests considering the rotation characteristics of automobile wheels

Numerical simulation on influence of tire pressure to stress distribution in wheel

Analysis on Influencing Factors of Lateral Stiffness of Mechanical Elastic Wheel

Pattern design and performance analysis of a flexible spoke bionic non-pneumatic tire

Performance analysis and multi-objective optimization of a non-pneumatic tire with bionic petal spokes

Key dynamic performance analysis of flexible spoke non-pneumatic tire for matched unmanned ground vehicles

Optimization of a non-pneumatic tire using design of experiments and machine learning techniques

Comparative Analysis of Static Loading Performance of Rigid and Flexible Road Wheel Based on Finite Element Method

Influence of Choosing Different Types of Elements on the Strength Analysis of A Wheel

Finite Element Analysis of a Flexible Ferris Wheel

A Spoke Strain-Based Method to Estimate Tire Condition Parameters for Intelligent Tires

Static Stiffness Properties of High Load Capacity Non-Pneumatic Tires with Different Tread Structures

Study on key mechanical properties of the flexible spoke non-pneumatic tire considering thermo-mechanical coupling

Design and simulation of a new type of composite flexible-spoke non-pneumatic tire