Abstract:In order to study the fatigue, 13° impact and 90° impact performance of wheel and propose a wheel structure design and optimization method based on these performance, taking a type wheel as research objects, united topology optimization was performed based on dynamic bending and radial fatigue tests, and an assembled wheel with a magnesium alloy rim and an aluminum alloy disc was designed. Finite element models of the assembled wheel for 13° impact tests were established to analyze the effective plastic strain of the wheel under two conditions of the hammer facing the spoke and the window respectively. And established finite element models of the assembled wheel for 90° impact tests, analyzed the deformation of the inner wheel flange and the effective plastic strain of the rim and disc when the hammer impacted facing the window, and analyzed the failure range of the wheel and the effective plastic strain of the rim and disc beyond the 25% circumferential range (90°) of the impact position when the hammer impacted facing the valve window. Then studied the relationship between these performance and the wheel structure. The parametric models of the assembled wheel under four finite element conditions were established with 12 design variables defined by using the mesh morphing technology. The Optimal Latin Hypercube design and Hammersley design were used to fit the Kriging surrogate model and to validate the precision of the surrogate model in Isight software platform where the DEP-MeshWorks and LS-DYNA software were integrated. Using the established surrogate model, Non-dominated Sorting Genetic Algorithm-II (NSGA-II) was adopted to perform the multi-objective optimization of the wheel. The Pareto frontier was obtained, and a compromise solution was selected as the optimal design result. The weight of the optimized assembled wheel was 28.59% less than that of the same type cast aluminum alloy wheel. Test the optimized wheels referencing four finite element conditions, and validate the correctness of finite element models by comparing the simulation and test values of equivalent strain and maximum acceleration on measuring points. The simulation analyses were in agreement with the test results. A wheel structural design process and multi-objective optimization method based on the fatigue, 13° impact and 90° impact tests performance were realized in this article, providing the theoretical and technical basis for wheel optimization design.

Optimization of a non-pneumatic tire using design of experiments and machine learning techniques

Structure Optimization of Pneumatic Tire Using an Artificial Neural Network

Optimization in airless tires design using backpropagation neural network (BPNN) and genetic algorithm (GA) approaches

Performance analysis and multi-objective optimization of a non-pneumatic tire with bionic petal spokes

Design Optimization of a Runflat Structure Based on Multi-Objective Genetic Algorithm

Design and simulation of a new type of composite flexible-spoke non-pneumatic tire

Multi-objective optimization design of wheel based on the performance of 13° and 90° impact tests

Topology Optimization and Multi-objective Optimization of Wheel Based on Fatigue Tests

A Hybrid Numerical-Experimental Analysis for Tire Air-Pumping Noise with Application to Pattern Optimization

Research on tire pattern parameters based on multi-objective optimization

Influence of Spoke Parameters on Load Capacity of Non-Pneumatic Tires Using Orthogonal Study and Analysis of Variance

Key dynamic performance analysis of flexible spoke non-pneumatic tire for matched unmanned ground vehicles

Pattern design and performance analysis of a flexible spoke bionic non-pneumatic tire

Materials Selection and Structural Analysis of Plastic Tire with Wheel Spokes

Self-adaptive Sequential Response Surface Method in Shape Optimization of Tire Tread

Machine Learning-Driven Optimization of TPMS Architected Materials Using Simulated Annealing

The Multi-Objective Optimization of a Non-Pneumatic Wheel Based on Its Life Prediction

Machine Learning-Based Multi-Objective Design Exploration Of Flexible Disc Elements

Enhancing Steel Wheel Ventilation Efficiency Through Multi-Objective Optimization

POSSIBILITIES FOR OPTIMAL DESIGN OF A CAR TIRE BASED ON A CRITERION OF SPATIAL STRENGTH BALANCE

Optimization and Design of a Railway Wheel Profile Based on Interval Uncertainty to Reduce Circular Wear