Abstract:ABSTRACT Ply steer is an inherent property of a belted tire, manifesting as the nonzero side force at a slip angle of zero, and it is thus an important design factor relevant to a vehicle's straight running, safety, and comfort. Although ply steer is a rolling contact phenomenon, there is a lack of approaches for direct measurement and modeling of tire ply steer force in motion. Thus, we developed an in situ measurement method for tire ply steer based on a recently proposed accelerometer-based intelligent tire system. This new measurement method is significant for three main reasons: it facilitates understanding of the inherent mechanism of ply steer for radial tires, it improves the intelligent tire's accuracy based on the accelerometer, and it provides an in situ measurement approach for tire ply steer. An accelerometer-based intelligent tire was developed to obtain acceleration measurements at different conditions in which the lateral behavior is of particular interest. Two unusual phenomena that have never been reported are observed: (1) lateral accelerations demonstrate asymmetrical behavior with respect to positive/negative slip angles and (2) lateral accelerations at zero slip angle still exist. It is hypothesized that the underlying reason for these two unusual phenomena is the ply steer–dependent kinematics, which can conversely be used to measure tire ply steer in situ. To this end, the mixed Lagrange–Euler approach for rolling contact kinematics is used to formulate tire lateral acceleration, which links both rigid motion and elastic displacement. It is clearly found that the lateral acceleration is proportional to the square of the rotating velocity and the second-order gradient of displacement. Based on this kinematic model, the features of lateral acceleration can be easily explained by tire ply steer, which manifests as the sinusoidal lateral deformation modes due to the coupling of the bending-twist deformation of the cord–rubber composites of the tire belt. The proposed hypothesis has been verified by finite element method simulations, and the experimental results prove that tire ply steer leads to the observed unusual lateral acceleration pattern. Thus, the quantitative value of ply steer could be measured in situ by integrating the obtained lateral acceleration and thus the apparent elastic slip angle, even under zero external wheel slip angle. In this manner, the intelligent tire system provides a direct measurement approach for tire ply in motion. In addition, the accuracy of the intelligent tire's algorithm might be improved by suitable modeling of the asymmetrical acceleration with respect to left/right slip based on the proposed hypothesis of ply steer–dependent kinematics.

A Spoke Strain-Based Method to Estimate Tire Condition Parameters for Intelligent Tires

The Influence of Tire Inflation Pressure on the Stress Distribution of Motorcycle Wheels

A Universal Approach to Tire Forces Estimation by Accelerometer-Based Intelligent Tire: Analytical Model and Experimental Validation

Intelligent Tire Prototype in Longitudinal Slip Operating Conditions

A Design of Intelligent Tire Prototype Based on Multiple Accelerometers

A Strain-Based Intelligent Tire to Detect Contact Patch Features for Complex Maneuvers

Study on intelligent tyre force estimation algorithm based on strain analysis

A Fusion Estimation of Tire Vertical Forces Using Model-Based Tire State Estimators for a Dual-Sensor Intelligent Tire

Tire Rolling Kinematics Model for an Intelligent Tire Based on an Accelerometer

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

A New Lateral Force Estimator for Intelligent Tires Based on Three-Dimensional Ring Model

A THREE-DIMENSIONAL TIRE RING ON ELASTIC FOUNDATION MODEL IN ROLLING CONTACT WITH APPLICATION TO INTELLIGENT TIRES

Research on simplified tire finite element modeling and simulation method

IN SITU MEASUREMENT OF TIRE PLY STEER BASED ON AN INTELLIGENT TIRE SYSTEM

Estimation of Tire Side-Slip Angles Based on the Frequency Domain Lateral Acceleration Characteristics Inside Tires

A Direct Slip Ratio Estimation Method based on an Intelligent Tire and Machine Learning

Continuous Measurement of Tire Deformation Using Long-Gauge Strain Sensors

Tire Force Estimation in Intelligent Tires Using Machine Learning

Research on Load Prediction Model Construction Method of the Tire Condition Monitoring System

Tire Slip Angle Estimation based on the Intelligent Tire Technology

A laser-based sensor system for tire tread deformation measurement