Abstract:In ITER, the metallic first mirrors (FMs) will undergo erosion due to their proximity to the fusion plasma and deposition of materials of the first wall, leading to mirror reflectivity's decrease. In vacuo plasma cleaning is foreseen for restoration of the FMs' optical properties by means of ion sputtering. Previously, it was shown that cyclic cleaning of polished metallic mirrors can lead to the development of pits due to low carbon amounts in the bulk mirror. The pitting formation is detrimental to the mirror's optical properties. This study aims to investigate the influence of carbon concentration on mirror morphology changes due to cyclic low-temperature plasma irradiation. Five rhodium (Rh) and carbon (C) coatings with different amounts of C were deposited on a pure Rh film on top of polished stainless steel substrates. All the samples were prepared by magnetron sputtering using a single or dual magnetron. Prior to each cycle of the plasma cleaning, a 20 nm layer of Al 2 O 3 was deposited on the Rh-C samples. The plasma discharge was created with argon gas using a 60 MHz radio frequency excitation and resulted in the complete removal of the alumina layer after each cycle. The surface morphology of the mirrors was characterized by employing scanning electron microscopy (SEM) and focused ion beam (FIB). After the cyclic cleaning, the coatings containing carbon have failed, showing either partial delamination, cracking, or total delamination. Additionally, all the mirrors demonstrated the formation of mounds on the surface, while 17 at.% of carbon in the film led to the development of pits. The mechanisms of coating failure and such morphological modification are discussed in the paper.

Characterization of heliostat corrosion

Surface studies of corrosion in second surface silver heliostat mirrors

Corosion of Aluminum Solar Reflectors

Behaviour of painted mirrors during exposure tests to salt spray

Corrosion resistance and electrochemical evaluation of silver mirrors

Development and growth of corrosion features on protected silver mirrors during accelerated environmental exposure

Morphological modification of Rh-C coatings upon low-energy Ar + ion sputtering

Deterioration of Novel Silver Coated Mirrors on Polycarbonate Used for Concentrated Solar Power

Corrosion characterization of durable silver coatings by electrochemical impedance spectroscopy and accelerated environmental testing

Outdoor exposure approach in a harsh environment toward the study of corrosion aspects of primary solar reflectors

Environmental effects on solar concentrator mirrors

Object dependent properties of mirrors for PV applications studied under accelerated weathering protocols

Chemical Degradation and Color Changes of Paint Protective Coatings Used in Solar Glass Mirrors

Study and comparison of naturally-aged and As-received silvered-glass reflectors

Electroless silver as an optical coating in an operational environment

Critical Constraints Responsible to Solar Glass Mirror Degradation

Environmental and Temporal Characterization of a Self-Healing Coating with Galvanic Protection

A Study on the Microstructure and Corrosion Characteristics of Early Iron Age Bronze Mirrors Excavated from the Korean Peninsula

Lifetime prediction of aluminum solar mirrors by correlating accelerated aging and outdoor exposure experiments

Investigation On Hf Based Etching Of The Polished K9 Glasses And Its Application In The Subsurface Damage

Sensing Properties of Metamaterials Utilized as Self-Cleaning Coating for Solar Mirrors