Abstract:One of the most promising developments for lowering the cost of utility scale concentrating solar power (CSP) is the emergence of durable reflective polymer films as an alternative to conventional curved glass mirrors. The broad adoption of wide web polymer film reflectors has been slowed by the lack of long-term weathering data. With the advent of the Ultra Accelerated Weathering System (UAWS), testing and development can proceed at a faster pace, and ReflecTech® Mirror Film has recently exceeded the equivalent terrestrial UV cumulative dosage of 25 years. ReflecTech® Mirror Film was developed through earlier collaborations between ReflecTech, Inc. (a subsidiary of SkyFuel, Inc.) and the National Renewable Energy Laboratory (NREL). More recently, through a Cooperative Research and Development Agreement (CRADA), ReflecTech, Inc. and NREL have developed an abrasion resistant coating (ARC) appropriate for application to polymer based mirror film. This hardcoat was developed to address the need for reflectors that are low in cost, high in performance and durable to mechanical cleaning methods sometimes used in the CSP environment. The combined impact of these two developments has the potential to significantly change the preferred supply choice for solar reflectors in new utility scale CSP projects. ReflecTech® Mirror Film samples prepared with and without the ARC hardcoat were subjected to accelerated exposure conditions more extreme than actual conditions. Both the uncoated and ARC films exhibit excellent weatherability with no loss in reflectance after highly accelerated exposure of over 25 years equivalent terrestrial UV. The ARC coated samples also exhibited outstanding initial abrasion resistance and adhesion to ReflecTech® Mirror Film, properties that were retained after exposure to various accelerated stress conditions including condensation cycling, thermal cycling, water immersion, and accelerated exposure to UV light. ReflecTech® Mirror Film is a commercially available product. The ARC-coated ReflecTech® Mirror Film has been successfully manufactured as a 1.5 m (5 ft) wide roll-to-roll construction in a commercial production environment and after further testing is expected to be commercially available in late 2011.

Object dependent properties of mirrors for PV applications studied under accelerated weathering protocols

Lifetime prediction of aluminum solar mirrors by correlating accelerated aging and outdoor exposure experiments

Study and comparison of naturally-aged and As-received silvered-glass reflectors

Analysis of the effects of outdoor and accelerated ageing on the optical properties of reflector materials for solar energy applications

From performance measurements to molecular level characterization: Exploring the differences between UV and DH weathering of PV modules

Chemical Degradation and Color Changes of Paint Protective Coatings Used in Solar Glass Mirrors

A Custom High-Throughput Optical Mapping Instrument for Accelerated Stress Testing of PV Module Materials

Impact of environmental variables on the degradation of photovoltaic components and perspectives for the reliability assessment methodology

ReflecTech® Polymer Mirror Film Advancements in Technology and Durability Testing

Lifetime Evaluation of Photovoltaic Polymeric Backsheets under Ultraviolet Radiation: From Chemical Properties to Mechanical Modeling

Critical Constraints Responsible to Solar Glass Mirror Degradation

Degradation analysis of field-exposed photovoltaic modules with non-fluoropolymer-based backsheets

Deterioration of Novel Silver Coated Mirrors on Polycarbonate Used for Concentrated Solar Power

Outdoor exposure approach in a harsh environment toward the study of corrosion aspects of primary solar reflectors

Development of an Accelerated Test Methodology to the Predict Service Life of Polymeric Materials Subject to Outdoor Weathering

The assessment of reflector material durability for concentrated solar power based on environment exposure and accelerated aging test

Sunlight tracking and concentrating accelerated weathering test applied in weatherability evaluation and service life prediction of polymeric materials: A review

Corosion of Aluminum Solar Reflectors

Soiling, cleaning, and abrasion: The results of the 5-year photovoltaic glass coating field study

Mirrors for space telescopes: degradation issues

Modelling of optical durability of enhanced aluminum solar reflectors