Abstract:One of the most promising developments for lowering the cost of utility scale concentrating solar power (CSP) is the emergence of durable reflective polymer films as an alternative to conventional curved glass mirrors. The broad adoption of wide web polymer film reflectors has been slowed by the lack of long-term weathering data. With the advent of the Ultra Accelerated Weathering System (UAWS), testing and development can proceed at a faster pace, and ReflecTech® Mirror Film has recently exceeded the equivalent terrestrial UV cumulative dosage of 25 years. ReflecTech® Mirror Film was developed through earlier collaborations between ReflecTech, Inc. (a subsidiary of SkyFuel, Inc.) and the National Renewable Energy Laboratory (NREL). More recently, through a Cooperative Research and Development Agreement (CRADA), ReflecTech, Inc. and NREL have developed an abrasion resistant coating (ARC) appropriate for application to polymer based mirror film. This hardcoat was developed to address the need for reflectors that are low in cost, high in performance and durable to mechanical cleaning methods sometimes used in the CSP environment. The combined impact of these two developments has the potential to significantly change the preferred supply choice for solar reflectors in new utility scale CSP projects. ReflecTech® Mirror Film samples prepared with and without the ARC hardcoat were subjected to accelerated exposure conditions more extreme than actual conditions. Both the uncoated and ARC films exhibit excellent weatherability with no loss in reflectance after highly accelerated exposure of over 25 years equivalent terrestrial UV. The ARC coated samples also exhibited outstanding initial abrasion resistance and adhesion to ReflecTech® Mirror Film, properties that were retained after exposure to various accelerated stress conditions including condensation cycling, thermal cycling, water immersion, and accelerated exposure to UV light. ReflecTech® Mirror Film is a commercially available product. The ARC-coated ReflecTech® Mirror Film has been successfully manufactured as a 1.5 m (5 ft) wide roll-to-roll construction in a commercial production environment and after further testing is expected to be commercially available in late 2011.

Environmental effects on solar concentrator mirrors

Impact of Soiling Physicochemistry on Mirrors With CSP Applications at the Plataforma Solar Del Desierto De Atacama, Chile

Deterioration of Novel Silver Coated Mirrors on Polycarbonate Used for Concentrated Solar Power

Analysis of Threshold Conditions for Cementation of Soiling on PV Modules and Telescope Mirrors

Development and mean life of aluminum first-surface mirrors for solar energy applications

Corosion of Aluminum Solar Reflectors

Surface studies of corrosion in second surface silver heliostat mirrors

Lifetime prediction of aluminum solar mirrors by correlating accelerated aging and outdoor exposure experiments

Rugged optical mirrors for Fourier transform spectrometers operated in harsh environments

Object dependent properties of mirrors for PV applications studied under accelerated weathering protocols

Study on Dust Deposition Mechanics on Solar Mirrors in a Solar Power Plant

Micrometeoroid/space debris effects on materials

Weathering of glasses for solar applications

The assessment of reflector material durability for concentrated solar power based on environment exposure and accelerated aging test

Characterization of heliostat corrosion

Study and comparison of naturally-aged and As-received silvered-glass reflectors

Study on the influence of dust accumulation on the optical performance of trough solar concentrator under different rainfall intensities based on alpine areas

Heat-collecting performance of linear Fresnel reflector concentrator measuring and forecasting after dust accumulation

ReflecTech® Polymer Mirror Film Advancements in Technology and Durability Testing

Experimental investigation of low velocity and high temperature solid particle impact erosion wear

Further option for solar concentrators: Aluminum first surface mirrors