Abstract:BackgroundPrecious objects made of silver and/or its alloys tarnish and become black when exposed to ambient atmospheres containing moisture and ppb-amounts of H2S. Such objects usually contain small but variable amounts of copper as alloying constituent and this affects the corrosion process due to a preferential oxidation of copper. However the visual appearance of the formed tarnishing layers on different types of silver alloys is very similar. Therefore, conservators-restorers are confronted with the problem that in some cases certain cleaning techniques are very effective while in other similar cases the removal of tarnishing layers is unsatisfactory. Since cleaning experiments are not allowed on genuine objects, many investigations use artificially corroded dummies instead. In order to evaluate the representativity and reproducibility of this often used methodology, differences in morphology, microstructure and composition of the sulfide layers on sterling silver generated by different sulfidation methods were analysed.ResultsSterling silver samples were artificially aged in five different environments. The samples exposed to uncontrolled ambient air at different locations (e.g. residential and laboratory environments) showed different corrosion rates and corrosion colours. Three accelerated ageing methods were executed in a gaseous or liquid environment under controlled conditions. These tests showed different results in morphology, microstructure, composition, thickness and the interface between bulk and corrosion layer. A first accelerated sulfidation procedure in a Na2S solution alternated with exposure to air, resulted in a fast corrosion rate and an even corrosion layer formation with several S-species. A second series of sulfidation in a controlled gas environment of H2S and SO2 developed a thin but uneven corrosion layer, mainly consisting of oxides. A third corrosion methodology used was based on the thioacetamide method. This resulted in an even and relative thick corrosion layer, comparable to the Na2S/aeration sulfidation system. However, the interface between the corrosion layer and the bulk is importantly different, showing severe voids.ConclusionsThe corrosion layers generated by five different experimental sulfidation series on identical prepared sterling silver coupons were clearly different from each other. Analyses demonstrated that the composition and microstructure of the corrosion layers were strongly dependent on the sulfidation method used and copper was found to be an important element present in all sulfide layers analysed. Therefore, artificially corroded sterling silver is not necessarily representative for naturally tarnished historical objects and the extrapolation of the cleaning results obtained on dummies to historical objects must be performed with care.

Development and growth of corrosion features on protected silver mirrors during accelerated environmental exposure

Corrosion characterization of durable silver coatings by electrochemical impedance spectroscopy and accelerated environmental testing

Corrosion resistance and electrochemical evaluation of silver mirrors

Surface studies of corrosion in second surface silver heliostat mirrors

Protective coatings for front surface silver mirrors by atomic layer deposition

Deterioration of Novel Silver Coated Mirrors on Polycarbonate Used for Concentrated Solar Power

Advanced protection against environmental degradation of silver mirror stacks for space application

Behaviour of painted mirrors during exposure tests to salt spray

Electroless silver as an optical coating in an operational environment

Preparation and characteristics of silver film mirror for large aperture optical elements by chemical method

Critical processing temperature for high performance protected silver thin film mirrors

Study and comparison of naturally-aged and As-received silvered-glass reflectors

Effect of intermediate layers on atomic layer deposition-aluminum oxide protected silver mirrors

Chemical corrosion protection of optical components using atomic layer deposition.

Characterization of heliostat corrosion

The sulfidation process of sterling silver in different corrosive environments: impact of the process on the surface films formed and consequences for the conservation-restoration community

Dual First and Second Surface Solar Mirrors of Polished WS2 and Silver by Dynamical Chemical Plating Technique on Polycarbonate

Object dependent properties of mirrors for PV applications studied under accelerated weathering protocols

Corosion of Aluminum Solar Reflectors

Highly Reflective Silver-Enhanced Coating with High Adhesion and Sulfurization Resistance for Telescopes

Element-Resolved Corrosion Analysis of Stainless-Type Glass-Forming Steels