Stability and Failure of Thin-Walled Composite Plate Elements with Asymmetric Configurations

Katarzyna Falkowicz

DOI: https://doi.org/10.3390/ma17091943

IF: 3.4

2024-04-24

Materials

Abstract:In the present study, the stability and failure phenomena of thin-walled constructions subjected to axial compression, featuring a central cut-out, and constructed from composite materials were explored. These constructions were fabricated from a carbon–epoxy composite using the autoclave method. The research encompassed experimental assessments on actual specimens alongside numerical analyses employing the finite element approach within the ABAQUS® software. The investigation spanned the entire load spectrum up to the point of structural failure, incorporating both practical trials and simulation analysis. During the practical assessments, the study monitored the post-buckling response and captured acoustic emissions to thoroughly evaluate the composite's failure mechanisms. Additionally, the ARAMIS system's non-invasive three-dimensional scanning was employed to assess deformations. Theoretical simulations utilized a step-by-step failure analysis, initiating with failure onset as per Hashin's theory and proceeding to failure progression based on an energy criterion. The simulation outcomes, particularly concerning the critical and post-critical phases, were juxtaposed with empirical data to identify the composite's vulnerability zones. The comparison underscored a significant concordance between the simulation predictions and the empirical findings.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to explore the stability and failure phenomena of thin - walled composite plates in an asymmetric configuration with a central cut - out under axial compression. Specifically, the research focuses on the following aspects:

1. **Stability and Failure Mechanisms**: The research explores the stability and failure mechanisms of these structures under axial compression, especially the whole process from initial damage to final failure.

2. **Combination of Experiment and Numerical Analysis**: Through the experimental evaluation of actual specimens and the numerical analysis carried out using the finite element method (FEM), the entire load spectrum from the start of loading to the complete failure of the structure is comprehensively studied.

3. **Post - Buckling Response and Acoustic Emission Monitoring**: During the experiment, the post - buckling response was monitored and the acoustic emission signals were recorded to evaluate in detail the failure mechanisms of the composite material.

4. **Non - Invasive Three - Dimensional Scanning**: Non - invasive three - dimensional scanning was carried out using the ARAMIS system to evaluate the deformation situation.

5. **Theoretical Simulation**: The theoretical simulation adopts a step - by - step failure analysis. First, the initial damage is determined according to the Hashin theory, and then the damage progression analysis is carried out based on the energy criterion.

6. **Comparison and Verification**: The simulation results are compared with the experimental data, especially in the critical and post - critical stages, in order to identify the vulnerable areas of the composite material.

By combining experimental and numerical analysis methods, the paper aims to comprehensively understand the stability and failure behavior of thin - walled composite plates in an asymmetric configuration under axial compression, and provide theoretical and experimental bases for engineering applications.