Abstract:The paper investigates the characteristics of the laser beam percussion micro-drilling (LBPMD) process in aerospace nickel-based superalloy Hastelloy X using microsecond pulses. The quality of the drilled hole is crucial in laser beam micromachining, and selecting appropriate process parameters significantly impacts the hole's quality. The objective is to achieve predefined hole dimensions with minimal taper angles. Additionally, the study focuses on the alteration of pulse width, which is a combination of laser pulse frequency and duty cycle. Laser power ( P ), duty cycle % ( D ), focal plane position ( FPP ), and laser frequency ( f ) are considered input parameters, while geometric features such as inlet and outlet diameters, hole taper angle, and inlet circularity are examined as process responses. ANOVA is employed to establish significant relationships between process parameters and response variations based on experimental tests. Creating a precise simulation model that accurately accounts for the moving boundary of the target material's receding surface is a crucial and challenging task in formulating the laser heat conduction problem. It is necessary to simultaneously capture the material's dynamic front movement and update the boundary conditions of the laser source. To model the micro-drilled hole with LBPMD, the UMESHMOTION and DFLUX subroutines, along with the arbitrary Lagrangian-Eulerian (ALE) adaptive remesh algorithm in the AbaqusTM software, are utilized. Notably, no previous numerical study has predicted the geometry of micro-drilled holes using this technique. The proposed procedure is validated through the predictions of inlet and outlet hole diameters. Special emphasis is placed on the validation of models. Consequently, the numerical model and statistical model are compared as well as the need to define model applicability. The study demonstrates that all input parameters significantly influence the inlet hole diameter, while the pulse width notably affects the taper angle and circularity. The interaction between high laser frequency and low duty cycle results in reduced pulse duration. Multi-objective optimization is performed to determine the optimal process parameter settings for desired quality characteristics, considering minimum hole taper angle, precise inlet diameter, and maximum inlet circularity of the hole as optimization criteria. The findings show that with the optimized predicted results obtained from the optimal input variables, a composite desirability of 92% can be achieved.

A comparative assessment in sequential μ-drilling of Hastelloy-X using laser in combination with μ-EDM and μ-ECM

A novel numerical modeling of microsecond laser beam percussion micro-drilling of Hastelloy X: experimental validation and multi-objective optimization

Assessment of surface integrity of Ni superalloy after electrical-discharge, laser and mechanical micro-drilling processes

High Speed EDM and Laser Drilling of Aerospace Alloys

A Hybrid Machining Process Combining Micro-EDM and Laser Beam Machining of Nickel–Titanium-Based Shape Memory Alloy

Innovative Approach for Machining Twin Holes on Superalloy-Nimonic 263 Using μ-EDM

Comparison of EDM and laser trepanation micro-drilling processes using multiple-criteria decision analysis

Effect of laser parameters on sequential laser beam micromachining and micro electro-discharge machining

Optimizing Hole Shape and Improving Surface Quality of Inconel 718 Alloy by High-Temperature Chemical Assisted Laser Processing

Research on Ultrasonic-Assisted Drilling in Micro-Hole Machining of the DD6 Superalloy

Femtosecond Laser Drilling 100 Μm Diameter Micro Holes with Aspect Ratios > 20 in a Nickel Based Superalloy

A Hybrid Algorithm-Based Comparative Analysis of a Newly Designed Tool Holder During the Machining of Hastelloy-B3 with MQL

Study of High-Speed Microhole Drilling by Combined Process using Laser and EDM-Apply for fuel injection nozzle-

A comprehensive study on water jet guided laser micro hole drilling of an aerospace alloy

Performance assessment of different cooling conditions in the sustainable machining of Hastelloy X alloy

Evolution of Hole Surface Integrity in Successive Processing Using Sequential Milling and Laser Shock Peening

Effect of water-based ultrasonic vibration on the quality of laser trepanned microholes in nickel super-alloy workpieces

Micro-Hole Drilled by Edm-Ecm Combined Processing

Comparison of percussion laser drilling quality with and without water-based ultrasonic assistance

Process Applicability and Hole Wall Microstructure Evolution Mechanism of Femtosecond Laser Spiral Drilling

Comparative study on manufacturing of EDM electrodes by laser sintering process