Abstract:Sustainable hard machining is a pressing need in manufacturing industries for techno-social, economic and environmental benefits to machine difficult-to-cut materials. Thus the present study investigates finish turning of hardened AISI D2 steel using a MTCVD coated carbide insert (TiN-TiCN-Al 2 O 3 ) with geometry CNMG120408FW and grade WK05CT under a multi-nozzle MQL system using LRT 30 mineral oil (50 ml/hr flow rate, 6 bar compressed air pressure, 30 mm nozzle distance from tool tip) for minimal quantity lubrication at both the rake and flank zones for assessment of machinability. Flank wear lies between 0.79 and 0.155 mm and within the failure criterion limit of 0.2 mm. Arithmetic surface roughness trials have been within 0.361–0.877 microns and within the 1.6 microns acceptable range. The cutting temperature has been between 80.7°C and 226.9°C and even below 200°C in the majority of runs. The cutting power lies within 0.432kW–0.804kW. The optimal parametric combination has been found to be d=0.1 mm, f=0.05 mm/rev and v=80 m/min respectively and improvement has been observed over dry cutting. RSM models are found to be statistically significant. Application of multi-nozzle MQL in machining of hardened steel outperformed through machinability assessment and may be adopted in shopfloor for sustainability.. L'usinage dur durable est un besoin pressant dans les industries manufacturières pour des avantages technico-sociaux, économiques et environnementaux pour usiner des matériaux difficiles à couper en remplacement du meulage dans la finition des composants. Ainsi, l'étude courante examine le tournage de finition de l'acier trempé AISI D2 à l'aide d'un insert en carbure (TiN-TiCN-Al 2 O 3 ) revêtu de MTCVD avec géométrie CNMG120408FW et de nuance WK05CT sous un système MQL multi-buses utilisant de l'huile minérale LRT 30 (débit de 50 ml/h, pression d'air comprimé de 6 bars, distance de la buse au bout de l'outil de 30 mm) pour une lubrification efficace de quantité minimale (MQL) dans les deux zones de coupe d'inclinaison et de flanc pour évaluer l'usinabilité et établir les paramètres d'usinage optimaux à l'aide de la conception de réseau orthogonal de Taguchi L 27 , de l'ANOVA et également d'une étude de caractérisation de l'usure de l'outil et de la morphologie des copeaux par MEB et EDS. Les plages d'usure des flancs se situent entre 0.79 et 0.155 mm et dans la limite du critère de défaillance de 0.2 mm. Les essais arithmétiques de rugosité de surface se situent entre 0.361 et 0.877 microns et dans la plage acceptable de 1.6 microns. La température de coupe à la pointe de l'outil se situe entre 80.7°C et 226.9°C et même en dessous de 200°C dans la majorité des essais. La puissance de coupe repose entre 0.432 kW et 0.804 kW. La combinaison paramétrique optimale s'avère de d = 0.1 mm, f = 0.05 mm/tr et v = 80 m/min, respectivement. On a observé une amélioration des caractéristiques d'usinabilité par rapport à la coupe à sec aux niveaux paramétriques optimaux. La corrélation entre les modèles RSM s'avère statistiquement significative. L'application de MQL multi-buses dans l'usinage de l'acier trempé a surpassé l'évaluation de l'usinabilité et peut être adoptée dans les ateliers pour des raisons de durabilité.

A Hybrid Algorithm-Based Comparative Analysis of a Newly Designed Tool Holder During the Machining of Hastelloy-B3 with MQL

A new internal cooling system for a green tubular channel investigated for tool life in Hastelloy-B3 turning for MQL medium

Multi-response optimization in face milling of EN-31 steel using analytical hierarchy process-based GRA

High-speed machining parametric optimization of 15CDV6 HSLA steel under minimum quantity and flood lubrication

Optimizing the machining variables in CNC turning of aluminum based hybrid metal matrix composites

Performance Analysis Of Aisi 4340 Hardened Steel In Dual Jet Mql Turning System: A Comparison Study Between Cvd And Pvd-Coated Carbide Tools

Comparative Performance Analysis on WEDM Responses for Titanium Matrix Composite Using Novel Multi-objective Optimization Algorithms

Performance assessment of different cooling conditions in the sustainable machining of Hastelloy X alloy

Performance assessment of the multi-nozzle injection MQL system for cleaner machining of hardened AISI D2 steel concerning power consumption

A hybrid approach for machining optimization of the WEDM using grey-fuzzy with Metaphor-Less algorithms for Ti-3Al-2.5V

Comparative evaluation and sensitivity analysis of multi-modelling and optimization of milling Ti–6Al–4V alloy with high-pressure coolant jets

Multi-Objective Optimization of Machining Parameters on Aluminium Alloy Metal Matrix Composites using Response Surface Methodology

Environmental, Economical and Technological Analysis of MQL-Assisted Machining of Al-Mg-Zr Alloy Using PCD Tool

Evaluation of Surface Roughness, Tool Wear and Chip Morphology during Machining of Nickel-Based Alloy under Sustainable Hybrid Nanofluid-MQL Strategy

Machinability Assessment of Hybrid Nano Cutting Oil for Minimum Quantity Lubrication (MQL) in Hard Turning of 90CrSi Steel

Machining Of Inconel-825 Superalloy With Magnetic Field Assisted Electrical Discharge Turning: A Optimization Approach Using Response Surface Methodology And Multi-Objective Genetic Algorithm

ASSESSMENT OF MACHINABILITY BEHAVIOUR OF LM24 – NANO Al2O3 – Gr HYBRID COMPOSITES THROUGH STIR CASTING TECHNIQUE

Tribology and machinability performance of hybrid Al2O3 -MWCNTs nanofluids-assisted MQL for milling Ti-6Al-4 V

Experimental Investigation and Performance Optimization during Machining of Hastelloy C-276 Using Green Lubricants

Optimization of process parameters for turning of titanium alloy (Grade II) in MQL environment using multi-CI algorithm

Examination of Minimum Quantity Lubrication Performance in the Hard Turning of AISI/SAE 1060 High-Carbon Steel