Abstract:Molybdenum nitrides and oxynitrides have been increasingly realized as (electro)catalysts for a variety of reactions. In this context, the cubic "γ-Mo2N", also known to contain oxygen in the bulk, is of particular interest. The γ phase is typically derived from ammonolysis of MoO3, and a high temperature is needed to fully react the stable MoO2 intermediate that often forms along the reaction pathway. In this study, ammonolysis of atypical bronze (HxMoO3) and peroxo (H2MoO5) precursors was undertaken to avoid the formation of this undesired intermediate with the aim of synthesizing "γ-Mo2N" at reduced temperatures and thus with a high surface area. It was found, using in situ powder diffraction, that, when the phase I bronze (x ≈ 0.3) served as the precursor, MoO2 formed as an intermediate and was retained in the reaction product until 700 °C. In contrast, ammonolysis of the phase III bronze (x ≈ 1.7) and of H2MoO5 circumvented the MoO2 intermediate. From these latter two precursors, "γ-Mo2N" was formed at the lowest maximum reaction temperatures reported in the literature, namely, 480 °C in the case of HxMoO3-III and 380 °C for H2MoO5. The resulting products displayed extremely high surface areas of 206 and 152 m2/g, respectively, presumably as a consequence of the low synthesis temperatures. While the HxMoO3-III precursor showed evidence of a topotactic transformation pathway, with morphological similarity between precursor and product phases, H2MoO5 transformed via amorphization. Electrochemical characterization showed moderate activity for the hydrogen evolution reaction (HER), which increased after exposure to reducing potentials and loosely scaled with the catalyst-specific surface area. This work points toward new low-temperature synthesis pathways for accessing molybdenum (oxy)nitrides with high surface areas.

Preparation of Molybdenum–Tungsten Alloy Powders via Magnesium and Calcium Vapor Reduction of Oxide Compounds

Microstructure, Compressive Performance and Wear Resistance of Pure Molybdenum Additively Manufactured Via Laser Powder Bed Fusion

Preparation and Surface Chemistry Study of Supported Cobalt Molybdenum Metal Nitrides

Preparation of fine-grained MoW solid solution alloys with excellent performances

Preparation of Ultrafine Tungsten-Molybdenum Composite Powder and Its Sintering Behavior

High-Density Mo–W–Cu Pseudoalloys Based on Homogenous Mo–25% W Powder Alloy Produced by Reducing Oxide Powders in Moving Layers

Molybdenum Oxide Precursors that Promote the Low-Temperature Formation of High-Surface-Area Cubic Molybdenum (Oxy)nitride

Sol-gel synthesis and characterization of tungsten-molybdenum solid solution nanoparticles

Preparation of ultrafine (W,Mo)B, (W,Mo)B2.5 and (Mo,W)AlB solid solution composite powders

Thermodynamic Analysis and Synthesis of Metallic Molybdenum Powder via the Solution Combustion Synthesis Process

Improving the mechanical properties and coefficient of thermal expansion of molybdenum-reinforced copper using powder metallurgy

In situ synthesis of spherical W Mo alloy powder for additive manufacturing by spray granulation combined with thermal plasma spheroidization

Rapid and Low-Temperature Molecular Precursor Approach toward Ternary Layered Metal Chalcogenides and Oxides: Mo 1– x W x S 2 and Mo 1– x W x O 3 Alloys (0 ≤ x ≤ 1)

Preparation and characterization of Mo/Al 2 O 3 composites

Microstructure and compression properties of fine Al2O3 particles dispersion strengthened molybdenum alloy

A novel method for preparing ultrafine molybdenum powder

Fabrication of Mo-Y2O3 Alloys Using Hydrothermal Synthesis and Spark Plasma Sintering

Low-alloyed molybdenum single crystals: preparation, structure and properties

Size-controlled preparations of tungsten and molybdenum borides in calcium or aluminum melt

Influence of the precursor composition and the reduction conditions on the characteristics of magnesium-thermic niobium powders

Study on the Structure and Formation Mechanism of Molybdenum Carbides