Abstract:Calcium molybdate forms powellite, it is produced as a result of oxidizing roasting of off-grade molybdenum sulphide concentrates and other molybdenum materials with calcium additives (calcium oxides and hydro xides, calcium chlorides) in air at the temperatures of 550–600 oC. Use of Na2CO3 solutions enables an efficient recovery of Мо from CaMoO4 and a quantitative removal of impurities. To determine the optimum conditions for this process, one would need data on CaMoO4 leaching within a broad range of Na2CO3 concentrations and at high temperature and one would need to analyze the composition of the solid phase and the kinetic parameters of the process, i.e. rate and rate-controlling step. The authors look at the CaMoO4 leaching kinetics in 1.0–2.5 mol/l Na2CO3 solutions at 60–90 oC. It was found that the process rate is dictated by the stirring intensity and tends to increase with a rising temperature and the reagent concentration rising in the range of 1.0–1.5 mol/l. A higher concentration of Na2CO3 has no effect on the reaction rate. An apparent reaction order was determined in the Na2CO3 concentration range of 1.0–1.5 mol/l. An equation is proposed for calculating the CaMoO4 dissolution rate for the Na2CO3 solution and the temperature of 80 oC. It was established that a kinetic mode of leaching takes place in the soda concentration range of 1.0–1.5 mol/l amid intensive stirring. It is demonstrated that, within the studied Na2CO3 concentration range, calcite СаСО3 is formed after vaterite, a less stable phase of calcite, with crystallization of double sodium-calcium carbonates Na2Са(CO3)2·nH2O (n = 0, 2, 5) occurring at the same time. With the concentration of soda being >1.5 mol/l, the process is controlled by internal diffusion. In this region, the leaching rate is independent of the Na2CO3 concentration. Formation of double carbonates is associated with an additional consumption of soda. Therefore, when using this system one should consider how CaMoO4 typically dissolves in Na2CO3 solutions. The presence of these compounds in the soda solution after molybdenum leaching may impact the recovery of Мо from the solution using the known techniques. It may also hinder the recirculation of sodium carbonates going for the second leaching cycle.

SYNTHESIS OF HIGHLY DISPERSED MOLYBDATE OF COBALT IN THE MELT SYSTEM (Na2MoO4 - NaCl)EVT – CoSO4

Thermodynamic Analysis and Synthesis of Metallic Molybdenum Powder via the Solution Combustion Synthesis Process

Evaluation of two processing routes for the synthesis of molybdenum oxide with cobalt addition

Study of the kinetics of calcium molybdate leaching with sodium carbonate solutions

Low-alloyed molybdenum single crystals: preparation, structure and properties

Low-temperature selective synthesis of metastable α-MoC with electrochemical properties: Electrochemical co-reduction of CO2 and MoO3 in molten salts

Tailoring the Composition and Structure of Nb-, Si-, and B-Doped Mo-Based Composite Materials in the Self-Propagating High-Temperature Synthesis Metallurgy Process

Dynamic DMF Binding in MOF-5 Enables the Formation of Metastable Cobalt-Substituted MOF-5 Analogues

General Synthesis and Phase Control of Metal Molybdate Hydrates MMoO4·nH2O (M = Co, Ni, Mn, N = 0, 3/4, 1) Nano/Microcrystals by a Hydrothermal Approach: Magnetic, Photocatalytic, and Electrochemical Properties

Cobalt molybdate nanoparticles: synthesis, characterization, optical and photocatalytic properties

Molybdenum-based two-dimensional materials: Synthesis, dispersion, exfoliation and thin film deposition

Stoichiometry and topological features of triple molybdates ABC(MoO4) with the heteropolyhedral open MT-frameworks: Synthesis, crystal structure of Rb5{Hf1.5Co0.5(MoO4)6}, and comparative crystal chemistry

One-Atmosphere Aqueous-Solution Synthesis of Trimolybdate Nanomaterials and the Feasibility for Mass Production

Arsenicum-centered Molybdenum–Vanadium polyoxometalates bearing transition metal complexes: Hydrothermal syntheses, crystal structures and magnetic properties

Facile Co-Precipitation Synthesis of Nano-Molybdenum-doped BaO Nanoparticles and Their Physical Characterization

A novel route to phase formation of cobalt oxyhydrates using KMnO4 as an oxidizing agent

Preparation and Characterization of Cesium and Cobalt Complex Oxide

Synthesis of Cobalt Oxyhydrate Superconductor Through a Disproportionation Reaction Route.

Exploration of Molybdenum Oxide precursors: A theoretical Study of MoxOy (x = 1-10) Clusters

Effect of Mo on Phase Stability and Properties in FeMnNiCo High-Entropy Alloys

Molybdenum Oxide Precursors that Promote the Low-Temperature Formation of High-Surface-Area Cubic Molybdenum (Oxy)nitride