Abstract:The calciothermic reduction of metals from manganese (MnNb2O6) and iron (FeNb2O6) niobates, which are analogs of natural columbite (Fe, Mn)(Nb, Ta)2O6 contained in commercial rare metal ores, is studied. Thermodynamic simulation using the HSC Chemistry software package is used to calculate the change in the Gibbs free energy, the equilibrium constants, and the thermal effects of the interaction reactions of MnNb2O6, FeNb2O6, and Nb2O5 with calcium. The probability of formation of both niobium and its alloys with iron or manganese is found to be high. The changes in the equilibrium phase compositions of the oxide–calcium interaction products as functions of temperature (in the range 1000–2500°C) and the ratios of reagents are estimated. According to the calculations of the adiabatic temperature and the specific heat effect, the reduction of metals from FeNb2O6 is feasible under “out-of-furnace” process conditions, and the reduction from MnNb2O6 would require preheating a charge to 600–800°C. During continuous heating up to 1200°C, the temperatures of the thermal effects related to reagent transformations and phase formation in the interaction products are detected by combined thermogravimetry and differential thermal analysis. The complete reduction of manganese and iron niobates is found to occur with the participation of molten calcium at a molar niobate/calcium ratio of 6 with the formation of metallic niobium and its intermetallic compounds, NbMn2 or FeNb, respectively. At excess reducing agent, solid-phase products hinder the diffusion of the calcium melt to the reaction surface, which slows down the completion of the process and promotes the development of secondary interactions between intermediate oxides (NbO, Mn0.95O, Mn2.907O4) and calcium oxide. To complete the reduction process, it is necessary to increase the temperature or the heating time.

Influence of the precursor composition and the reduction conditions on the characteristics of magnesium-thermic niobium powders

Preparation of Niobium Metal Powder by Two-Stage Magnesium Vapor Reduction of Niobium Pentoxide

Production of Niobium Powder by Magnesiothermic Reduction of Feed Preform

Production of Niobium Powder by Preform Reduction Process Using Various Fluxes and Alloy Reductant

Synthesis of Niobium and Tantalum Nitrides via Nitridation of Powders during Calcium Reduction of Their Oxide Compounds

Calcium Vapor Reduction of Niobium Oxide Compounds

Heat Treatment of Tantalum and Niobium Powders Prepared by Magnesium-Thermic Reduction

The Effect of Reduction Temperature on the Characteristic Variation of Niobium Powder During Metallothermic Reduction Process

Study of the aluminothermic reduction of niobium pentoxide through thermal analysis experiments and high energy milling processing

Study of Physicochemical Characteristics of Niobium-Containing Oxide Materials. Part 1. Thermodynamic Simulation

Synthetic approach of ternary magnesium niobate (Mg-Nb-O) compounds

THE MANUFACTURING OF NIOBIUM POWDER BY HUNTER PROCESS

The fabrication of niobium powder by sodiothermic reduction process

Preparation of Niobium Powders by Sodiothermic Reduction of K 2 NbF 7

OBTENÇÃO DE Nb METÁLICO ATRAVÉS DA REDUÇÃO DE Nb2O5 POR MOAGEM DE ALTA ENERGIA

Preparation of Molybdenum–Tungsten Alloy Powders via Magnesium and Calcium Vapor Reduction of Oxide Compounds

Catalytic Activities of Various Niobium Oxides for Hydrogen Absorption/Desorption Reactions of Magnesium

Comparison of the Magnesiothermic Reduction Behavior of Nb2O5 and Ti2Nb10O29

Production of niobium powder by direct electrochemical reduction of solid Nb2O5 in a eutectic CaCl2-NaCl melt

Thermodynamic Simulation and Experimental Investigation of the Calciothermic Reduction of Metals from Manganese and Iron Niobates