Abstract:The aluminothermic reduction is a highly exothermal reaction between a metal oxide and aluminium. Conventionally this reaction is ignited by an electric resistance and the reaction products after cooling are in the form of a rigid block of mixed metal and aluminium oxide. In this work a new process of aluminothermic reduction is presented, in which the reaction is ignited by a hydrogen plasma. The niobium oxide and aluminium powders are high energy milled for six hours to form particles constituted of oxide and aluminum. Stoichiometric, substoichiometric and superstoichiometric mixtures were prepared. The mixture was placed in a stainless steel tube (the hollow cathode) inside the reactor chamber. The chamber was firstly evacuated. Then hydrogen at low pressure was introduced. In the following an electric discharge between the cathode and the anode localized just above the cathode ignites the plasma. The plasma heats the particles on the surface of the powder layer and starts the reaction that proceeds in each particle since the reactants are intimately mixed. The heat generated by the reaction propagates deeper in the layer until the whole mixture reacts. Substoichiometric mixtures can be used because hydrogen takes part of the reduction. The Nb2O5 – Al starting powder mixture and the products of the reaction are characterized by laser grain size measurement and X-Ray diffraction (XRD). The products are in form of powder or agglomerates of particles. Phases of reaction products was determined by XRD analysis and the particle size trough SEM.

Preparation of Niobium Metal Powder by Two-Stage Magnesium Vapor Reduction of Niobium Pentoxide

Production of Niobium Powder by Magnesiothermic Reduction of Feed Preform

Production of Niobium Powder by Preform Reduction Process Using Various Fluxes and Alloy Reductant

Influence of the precursor composition and the reduction conditions on the characteristics of magnesium-thermic niobium powders

Synthesis of Niobium and Tantalum Nitrides via Nitridation of Powders during Calcium Reduction of Their Oxide Compounds

Calcium Vapor Reduction of Niobium Oxide Compounds

The fabrication of niobium powder by sodiothermic reduction process

Aluminothermic Reduction of Niobium Pentoxide in a Hydrogen Plasma Furnace

Low-temperature synthesis of niobium oxide nanoparticles from peroxo niobic acid sol.

THE MANUFACTURING OF NIOBIUM POWDER BY HUNTER PROCESS

Preparation of Niobium Powders by Sodiothermic Reduction of K 2 NbF 7

OBTENÇÃO DE Nb METÁLICO ATRAVÉS DA REDUÇÃO DE Nb2O5 POR MOAGEM DE ALTA ENERGIA

Synthetic approach of ternary magnesium niobate (Mg-Nb-O) compounds

Study of the aluminothermic reduction of niobium pentoxide through thermal analysis experiments and high energy milling processing

Production of niobium powder by electronically mediated reaction (EMR) using calcium as a reductant

Production of niobium powder by direct electrochemical reduction of solid Nb2O5 in a eutectic CaCl2-NaCl melt

Chemical Vapor Synthesis of Ultrafine Niobium Powder Via Sodiothermic Reduction of Chloride

Purification of Niobium by Electron Beam Melting

The Effect of Reduction Temperature on the Characteristic Variation of Niobium Powder During Metallothermic Reduction Process

The Effect of Reducing Agent on the Production of Niobium Powder by Metallothermic Reduction