Abstract:The porous TiCO ceramic was synthesized through a one-step sintering method, utilizing phenolic resin, TiO2 powder, and KCl foaming agent as raw materials. Ni(NO3)2·6H2O was incorporated as a catalyst to facilitate the carbothermal reaction between the pyrolytic carbon and TiO2 powder. The influence of Ni(NO3)2·6H2O catalyst content (0, 5, 10 wt.% of the TiO2 powder) on the microstructure, compressive strength, and thermal conductivity of the resultant porous TiCO ceramic was examined. X-ray diffraction and X-ray photoelectron spectroscopy results confirmed the formation of TiC and TiO in all samples, with an increase in the peak of TiC and a decrease in that of TiO as the Ni(NO3)2·6H2O content increased from 0% to 10%. Scanning electron microscopy results demonstrated a morphological change in the pore wall, transforming from a honeycomb-like porous structure composed of well-dispersed carbon and TiC-TiO particles to rod-shaped TiC whiskers, interconnected with each other as the catalyst content increased from 0% to 10%. Mercury intrusion porosimetry results proved a dual modal pore-size distribution of the samples, comprising nano-scale pores and micro-scale pores. The micro-scale pore size of the samples minorly changed, while the nano-scale pore size escalated from 52 nm to 138 nm as the catalyst content increased from 0 to 10%. The morphology of the pore wall and nano-scale pore size primarily influenced the compressive strength and thermal conductivity of the samples by affecting the load-bearing capability and solid heat-transfer conduction path, respectively.

Fabrication of high-performance Magnéli phase Ti4O7 ceramics by in-situ hot-pressed sintering in a single step

The Effect of Magnéli phase Ti4O7 as an additive in air-sintered TiO2 ceramics

Conduction and sintering mechanism of high electrical conductivity Magnéli phase Ti4O7

A high strength and conductivity bulk Magnéli phase Ti 4 O 7 with superior electrochemical performance

Fabrication And Thermoelectric Properties Of Magneli Phases By Adding Ti Into Tio2

Preparation of Monophasic Titanium Sub-Oxides of Magnéli Phase with Enhanced Thermoelectric Performance

Fabrication and Thermoelectric Properties of Magneli Phases by Adding Ti into TiO<sub>2</sub>

Columbite-rich Multiphase TiO2 Nanoceramic with Superior Mechanical and Dielectric Properties

Magnèli Phase Ti O2-1 Bulks Prepared by SPS Followed by Carbon Reduction and Their Thermoelectric Performance

Thermoelectric Performance Enhancement of Magnéli Phase Ti n O 2 n −1 Compacts by In Situ Reduction of TiO 2 with Charcoal Powder via Spark Plasma Sintering

Low-Temperature and Rapid Fabrication of Bulk Nano-TiO2 Ceramic

Preparation and properties of in situ TiC/corundum–mullite electrically conductive ceramic

Fabrication and properties of Ti3AlC2-based ceramics by two-step method

Enhanced Mechanical/electrical Properties of in Situ Synthesized SiC-TiB2 Ceramic Composites by Reactive Hot-Pressing Sintering

Stabilization of thermal storage ceramics via the phase reconstruction of ferrotitanium slag and migration of Mg element

Microstructure, Mechanical Property and Thermal Conductivity of Porous TiCO Ceramic Fabricated by In Situ Carbothermal Reduction of Phenolic Resin and Titania

TiO2-assisted Mg-Ti-O-based ceramics improve thermal conductivity and microwave dielectric properties by modifying the microstructure

Fabrication of Electroconductive Si3N4–TiN Ceramic from Iron Ore Tailing

Influence of the electric field and annealing temperature on flash-sintered (Mg1/3Nb2/3)0.05Ti0.95O2 ceramics

Phase formation and performance of high Curie temperature Bi(Ni0.5Ti0.5)O3–BiFeO3–PbTiO3 ceramics

Fabrication of high performance silicon nitride ceramics with TiO2 additive by annealing process