Abstract:Research purposes: In order to resolve the problem that the box girder is difficult to be transported and erected by the existing transportation erection equipment in the bridge- tunnel immediately joint section on high-speed railway,this paper studies the design of bridge erecting machine with transporting and erecting and meeting the whole machine crossing tunnel,erecting box girder at tunnel entrance and erecting box girder inside tunnel.Research conclusions: The scheme of the SLJ 900 /32 mobile bridge erecting machine in this paper is as follows:( 1) The main support leg adopts the joint- dominated triangular structure. The supporting wheel train mechanism is used on the main support leg. Without any anchor measures,the main support leg is designed to realize the structure self-stabilization and can resist overturning moment which bridge erecting machine over the span to the next pier.( 2) With the constant drive mode on the main support leg,the bridge erecting machine realizes the synchronization control mode of different driving method and improves the safety and reliability in operation.( 3) Through alternating functional transformation technique of the main support leg and auxiliary support leg,the bridge erecting machine can over the span to the next pier without the need of the guide beam. The operational process is simplified and the bridge erecting machine can erect box girder at tunnel entrance and erect box girder inside tunnel.( 4) This application verifies that the main support leg with the automatic warning detecting device can achieve not only the real time and on- line monitoringinternal force,but also the automatic warning even emergency stop protection when the internal force exceeded to ensure safety in operation.( 5) This research results are available for transporting and erecting large- tonnage concrete box girder in normal working conditions and in the bridge- tunnel immediately joint section on high- speed railway.

Section-assembling bridge girder erection machine suitable for erecting bridges with minimum curve radii

Key Techniques for Erection of Steel Truss Girders of Dashengguan Changjiang River Bridge in Nanjing

Structural design and analysis of a large span partially single-sided cable-stayed pedestrian bridge

Design and Construction of 4200 kN Cable Crane for Caiyuanba Changjiang River Bridge

Innovative Technology in Channel Bridge Foundation Design and Construction of Pingtan Strait Hi-Rail Bridge

An analytical method and its application for large-section PC box girder bridges

Automatic assembling operation device and method for open type TBM steel arch frame

Open type TBM steel arch frame automatic assembling operation device

Design of Trestle of Pingtan Straits Rail-cum-Road Bridge

Design and development of bridge erecting machine with small curve radius and bottom feeding beam

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Steel arch frame assembling hydraulic system for tunnel boring machine

Design and Dynamical Analysis of New Light Deployable Bridge

A kind of new flow type bridge erecting machine

Method for reinforcing bridge erecting machine

An Integrated Erection Method for Segmental Assembled Bridge in Urban District

Design,Selecting Type and Application of SLJ 900/32 Mobile Bridge Erecting Machine

Using Sliding System of Bridge Girder Erection Machine to Implement Suspending and Setting of Small Box Girder at Joint of Ramp and Principal Line

Research on 3D Measurement and Rapid Location Technique for Assembling the Special-Shaped Structural Segments

Installation and control technology of the Haihe movable bridge, China

Jacking Technology for a Simply Supported Girder Bridge