Abstract:The 50 m box girders in the tidal flat section of unnavigable channel bridge in Hangzhou Bay Bridge adopt the approach of trolley on the under bridge to transport and erect the girder. Based on the actual working and load conditions, a precise 3D solid FEM simulation model is established by taking account of the space effects of prestressing force, applying equivalent node force and taking reasonable consideration of support details, etc. The values for concrete characteristics are determined according to current specifications for the design of highway bridge. The load is calculated with the consideration of the worst factors. The bottom of the support is simulated as rigid element. Modulus of elasticity for girder contact layer will not appear tensile stress when rotations and deformations occur at girder end. Element mesh should be as subdivided as possible when the structure is discretized. Owing to the relative complexity of the stress at girder end, thicker than span intermediate element mesh is adopted for girder end. The integral deformation and the space stress distribution of weight-bearing box girder are calculated. Results indicate that the deformation is relatively small and the maximum deflection is within the reversed arch because the load is quite close to the support. The maximum main tensile stress of the support section occurs at the side of bottom plank surface, which exceeds concrete cracking strength. Consequently, concrete in this area should be treated and stiffened so as to avoid it from cracking. When the maximum main compressive stress occurs near the stabilizer of girder-erecting machine, its value is less than the compressive strength of concrete.

Jacking Technology for a Simply Supported Girder Bridge

Integral Lifting of a Three-Span Continuous Beam Bridge

Strength Analysis of a Certain 350 ft Jack-up Offshore Platform Jacking System in Emergency Lifting Process under Different Working Conditions

Safety Control Research of Steel U Girder of Composite Bridge with Incremental Launching Construction

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Evaluation of Long Multi-Span Steel U-Shaped Girder During Incremental Launching Construction

Design and Dynamical Analysis of New Light Deployable Bridge

Analysis and Monitor of Hanger Rod Installation by Jacking Tie Beam on Heterotypical Arch Bridge

Ultimate Bearing Capacity of Steel U-Girders under Local Load in Incremental Launching Method

Stability analysis of braced structures under jacking construction of large span steel truss bridges

Integral lifting project of the Qifeng bridge

Reinforcement Analysis of an Old Multi-Beam Box Girder Based on a New Embedded Steel Plate (ESP) Strengthening Method

Integral Lifting Construction and Monitoring of Qifeng Bridge in Huzhou City

Monitoring and control of steel truss arch bridge jacking construction

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Analysis of the forces in the construction of large-span steel box girder by incremental construction

FINITE ELEMENT SIMULATION ANALYSIS OF STEEL TRUSS ARCH BRIDGE JACKING CONSTRUCTION

Fatigue performance of a simply-supported T-beam UHPC bridge deck variable section joint structure

Simulation analysis and control research of long multi-span composite bridge with incremental launching construction

Bridge Widening with Composite Steel-Concrete Girders: Application and Analysis of Live Load Distribution

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge