Abstract:This paper proposes different optimization schemes for enhancing the performance of conventional continuous composite girder bridges with corrugated steel webs. In particular, for the positive moment region, the substitution of a ribbed steel plate for the reinforced concrete bottom flange is proposed for optimizing such bridges. Three-dimensional finite-element analysis was used to preliminarily validate this optimization scheme based on the background project, Dongbaohe Xinan Grand Bridge. An experimental study revealed that the optimization scheme can afford advantages, such as reduced self-weight, avoidance of cracking in the bottom flange, and convenient construction. If the steel plate with proper thickness is used, higher flexural stiffness and load capacity can be achieved as additional advantages due to the enhanced steel ratio of the cross section. For the negative moment region of the bridge, the optimization scheme was implemented in two parts identified as Optimization Schemes I and II. In Scheme I, corrugated steel plate-concrete composite webs were used, whereas a steel-concrete composite bottom flange was further adopted in Scheme II. Compared to the conventional scheme, both Optimization Schemes I and II significantly reduced the shear stress in the corrugated steel web and at the steel-concrete interface due to the lined concrete in the web. Thus, it can be deduced that the applied load corresponding to the yield of the corrugated steel web will be enhanced; namely, the shear capacity will be enhanced. Because shear connection failure was prevented in both optimization schemes, there were remarkable improvements of the load capacity and ductility of the girder. The confining effect of the lined concrete decreased the prestress lead-in ratio, but not significantly. In addition, Optimization Scheme II afforded much greater construction convenience compared to both Optimization Scheme I and the conventional scheme. (C) 2016 American Society of Civil Engineers.

Bridge Widening with Composite Steel-Concrete Girders: Application and Analysis of Live Load Distribution

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Application of composite structures in bridge widening

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Influence analysis of group studs stiffness in accelerated construction steel-concrete composite small box girder bridges

Load Distribution Factor for Moment of Composite Bridges with Multi-Box Girders

Composite Girder Design of Cable-Stayed Bridges

Modeling and Testing of a Composite Steel-Concrete Joint for Hybrid Girder Bridges

Lateral Load Distribution of Articulated Hollow Slab Beam Bridge Strengthened by Transverse Prestressed Force

A New Widening Method of Reinforced Concrete Box Girder and Its Experimental Research

Research on Static Load Capacity for Curved Steel-Concrete Composite Girder Bridge

Steel-UHPC lightweight composite bridge girders for long-span bridges

Mechanical Performance and Design Optimization of Rib-Stiffened Super-Wide Bridge Deck with Twin Box Girders in Concrete

Construction and Live Load Behavior of a Skewed Steel I-Girder Bridge

Application of Steel Plate and Concrete Composite to Strengthening of Reinforced Concrete Girder

Optimized Prestressed Continuous Composite Girder Bridges with Corrugated Steel Webs

Optimization of Mechanical Behavior of Steel and Concrete Continuous Composite Truss Girder Bridge

Field Test and Theoretic Analysis of an Old Bridge Widened with Steel-Concrete Composite Beams

Shear connector performance analysis for composite bridge deck with corrugated steel sheeting