Abstract:Abstract Powder bed fusion (PBF) is an additive manufacturing (AM) technique that holds a great promise for alumina ceramic materials to be processed in a one step. To ensure an effective outcome, the powder material should be thoroughly tailored, and the process parameters should be appropriately investigated. These process parameters include laser power, scanning speed, hatching space, and scanning strategies. The alumina powder has been tailored and modified to be appropriately used for PBF using the spray-drying technique, and the process parameters have been predicted and selected using a developed numerical model. Different scanning speeds of 100, 200, 300, and 400 mm/s have been considered, and the other parameters have been numerically predicted. The results demonstrated that spray drying is an effective technique for tailoring the characteristics of alumina powder, such as particle shape, particle size distribution, flowability, and absorptivity, making it ideally suited for PBF processing. Furthermore, the developed numerical model demonstrated outstanding reliability in predicting the most effective laser power and hatching space for different scanning speeds, resulting in significant cost and time savings when compared to relying solely on experimental trials. Employing a scanning speed of 400 mm/s yielded a significant improvement in relative density and quality of the printed samples surpassing other scanning speeds. Moreover, this speed effectively addressed various challenges encountered by other scanning speeds. Following the optimization of process parameters, it was determined that a relative density of 94.5% could be achieved by utilizing a scanning speed of 400 mm/s, a laser power of 210 W, and a hatching space of 30 μm. However, the evaluation of mechanical performance revealed that while the microhardness of the printed alumina samples matched the values reported in the literature, the attained compressive strength fell significantly below the values reported in the literature.

Improved Mechanical Properties of Alumina Ceramics Using Plasma-Assisted Milling Technique

Dielectric Barrier Discharge Plasma Assisted Ball Milling Technology and Its Applications in Materials Fabrication

Microstructures and mechanical properties of additively manufactured alumina ceramics with digital light processing

A New Heating Route of Spark Plasma Sintering and Its Effect on Alumina Ceramic Densification

Influence of sintering process on microstructure and mechanical properties of alumina ceramics: Spark plasma and microwave hybrid sintering

Microstructural refinement and mechanical response of Al2O3–ZrO2 eutectics fabricated by a novel pulse discharge plasma assisted melting method

Experimental and numerical investigations into the fabrication of alumina ceramic surface microchannel by electrochemical discharge machining

Fabrication and properties of alumina ceramics shaped by digital light processing as an additive manufacturing technology

Preparation of high performance dense Al 2 O 3 ceramics by digital light processing 3D printing technology

Enhancing powder bed fusion of alumina ceramic material: a comprehensive study from powder tailoring to mechanical performance evaluation

Insights into the influence of powder particle shape on forming process and mechanical properties of Al2O3 ceramic fabricated by laser directed energy deposition

Microstructure and Properties of Alumina Ceramics Prepared from Submicrometer Alumina Powder with MgO–ZrO2 Coated on Alumina Grain Surface

Effect of Melting Behavior of Al2O3 Powder on the Structure and Dielectric Properties of Plasma-Sprayed Coatings

Effect of ball milling treatment on the microstructures and properties of Cr2AlC powders and hot pressed bulk ceramics

Additive manufacturing of Al2O3 ceramic core with applicable microstructure and mechanical properties via digital light processing of high solid loading slurry

Effect of high-enthalpy atmospheric plasma spraying parameters on the mechanical and wear resistant properties of alumina ceramic coatings

Interaction Between Pulsed High-Energy-Density Dusty Plasma and Alumina Ceramics

Influence of the Dispersant on the Bead Milling of Alumina

Enhanced Properties of Pure Alumina Ceramics by Oscillatory Pressure Sintering

Microstructure refinement-homogenization and flexural strength improvement of Al2O3 ceramics fabricated by DLP-stereolithography integrated with chemical precipitation coating process

Radio Frequency Plasma Spheroidization of Alumina as a Feedstock Material for Ceramic 3D Printing