Abstract:As a 3D printing method, laser powder bed fusion (LPBF) technology has been extensively proven to offer significant advantages in fabricating complex structured specimens, achieving ultra-fine microstructures, and enhancing performances. In the domain of manufacturing melt-grown oxide ceramics, it encounters substantial challenges in suppressing crack defects during the rapid solidification process. The strategic integration of high entropy alloys (HEA), leveraging the significant ductility and toughness into ceramic powders represents a major innovation in overcoming the obstacles. The ingenious doping of HEA particles preserves the eutectic microstructures of the Al2O3/GdAlO3(GAP)/ZrO2 ceramic composite. The high damage tolerance of the HEA alloy under high strain rates enables the absorption of crack energy and alleviation of internal stresses during LPBF, effectively reducing crack initiation and growth. Due to increased curvature forces and intense Marangoni convection at the top of the molt pool, particle collision intensifies, leading to the tendency of HEA particles to agglomerate at the upper part of the molt pool. However, this phenomenon can be effectively alleviated in the remelting process of subsequent layer deposition. Furthermore, a portion of the HEA particles partially dissolves and sinks into the molten pool, acting as heterogeneous nucleation particles, inducing the formation of equiaxed eutectic and leading primary phase nucleation. Some HEA particles diffuse into the lamellar ternary eutectic structures, further promoting the refinement of eutectic microstructures due to increased undercooling. The innovative doping of HEA particles has effectively facilitated the fabrication of turbine-structured, conical, and cylindrical ternary eutectic ceramic composite specimens with diameters of about 70 mm, demonstrating significant developmental potential in the field of ceramic composite manufacturing.

Microstructure refinement-homogenization and flexural strength improvement of Al2O3 ceramics fabricated by DLP-stereolithography integrated with chemical precipitation coating process

Microstructures and mechanical properties of additively manufactured alumina ceramics with digital light processing

Fabrication of fine and complex lattice structure Al2O3 ceramic by digital light processing 3D printing technology

Preparation of high performance dense Al 2 O 3 ceramics by digital light processing 3D printing technology

Fabrication of alumina ceramics with high flexural strength using stereolithography

Additive manufacturing of Al2O3 ceramic core with applicable microstructure and mechanical properties via digital light processing of high solid loading slurry

Digital light processing‐based additive manufacturing of orientation‐controlled Al2O3 ceramics with improved damage tolerance

Fabrication of High-Performance Al2O3-ZrO2 Composite by a Novel Approach That Integrates Stereolithography-Based 3D Printing and Liquid Precursor Infiltration

Enhanced curing behavior, mechanical and thermal properties of 3D printed aluminum nitride ceramics using a powder coating strategy

Formation mechanism and controlling strategy of lamellar structure in 3D printed alumina ceramics by digital light processing

Preparation of excellent performance ZTA ceramics and complex shaped components using digital light processing 3D printing technology

Reinforcement effect in printing precision and sintering performance for liquid crystal display stereolithography additive manufacturing of alumina ceramics

Towards high strengthening efficiency of equiaxed and platelet-shaped alumina reinforced zirconia ceramics with textured microstructure using DLP-based stereolithography

Impact of Sintering Aid Type and Content on the Mechanical Properties of Digital Light Processing 3D-Printed Si3N4 Ceramics

Microstructure and properties evolution of silicon-based ceramic cores fabricated by 3D printing with stair-stepping effect control

In-situ Y3Al5O12 enhances comprehensive properties of alumina-based ceramic cores by vat photopolymerization 3D printing

Study of alumina ceramic parts fabricated via DLP stereolithography using powders with different sizes and morphologies

Preparation of large-size alumina ceramic parts by DLP 3D printing using high-solid-loading paste and optimizing the debinding process

Enhanced 3D Printing and Crack Control in Melt-Grown Eutectic Ceramic Composites with High-Entropy Alloy Doping

Fabrication and properties of alumina ceramics shaped by digital light processing as an additive manufacturing technology

Enhanced 3D Printed Alumina Ceramic Cores Via Impregnation