Abstract:Melt-grown oxide eutectic ceramics are well known for their excellent mechanical properties and microstructural stabilities at ultra-high temperatures. Laser powder bed fusion (LPBF) provides a novel technology for manufacturing materials with large sizes and complex structures. However, crack controlling is a serious challenge in this process owing to the intrinsic brittleness of ceramic materials. In this study, LPBF method is applied to fabricate Al2O3/GdAlO3/ZrO2 ternary eutectic ceramics assisted by a finite element method (FEM) to investigate an optimized process and innovatively reveal the crack formation mechanism and propagation behavior via a single track, a single layer, and multilayers. Temperature and thermal stress distributions under different process parameters are obtained. The maximum tensile stress & sigma;y (in front of and behind the edge of the molten pool) perpendicular to the scanning direction induces a longitudinal crack, the tensile stress & sigma;x (at the side rim of the molten pool) parallel to the scanning direction induces a transverse crack, and the shearing stress on the XY plane promotes the deflection of the transverse crack on one side of the single track. In the multilayer, the maximum principal stress occurs at the margin zone of the deposition. The maximum principal stress increases at the first three layers and then decreases after the fourth layer. Based on the simulation result, the as-solidified Al2O3/GdAlO3/ZrO2 eutectic ceramics with multiple shapes, such as cylindrical, cubic with round corners, triangular prism, and quadrangular, with dimensions of 30 mm (width or diameter) x 30 mm (length or diameter) x 1 mm (height) and ultra-fine eutectic microstructures (eutectic spacing of approximately 88 nm) are fabricated by LPBF, providing a significant potential to overcome the bottleneck for fabricating large-size and complex-structure ceramics directly in a single-step process. This work provides theoretic foundation and technical support for preparation of ultra-high temperature solidified oxide eutectic ceramics with ultra-fine microstructures and complex structures directly, which has great application potential in fields as aerospace, machinery, and chemical industry.

Insights into the influence of powder particle shape on forming process and mechanical properties of Al2O3 ceramic fabricated by laser directed energy deposition

One-step additive manufacturing and microstructure evolution of melt-grown Al2O3/GdAlO3/ZrO2 eutectic ceramics by laser directed energy deposition

Melt-grown behaviour of heat treated high-purity alumina ceramics prepared by laser directed energy deposition

Experimental investigation on Laser Directed Energy Deposition based additive manufacturing of Al2O3 bulk structures

Microstructure refinement-homogenization and flexural strength improvement of Al2O3 ceramics fabricated by DLP-stereolithography integrated with chemical precipitation coating process

Investigation of melt-growth alumina/aluminum titanate composite ceramics prepared by directed energy deposition

Digital light processing‐based additive manufacturing of orientation‐controlled Al2O3 ceramics with improved damage tolerance

Microstructures and mechanical properties of additively manufactured alumina ceramics with digital light processing

Preparation of high performance dense Al 2 O 3 ceramics by digital light processing 3D printing technology

Effect of laser focus shift on the forming quality, microstructure and mechanical properties of additively manufactured Al2O3–ZrO2 eutectic ceramics

New Laser Machining Technology of Al2O3 Ceramic with Complex Shape

Directly fabricated Al2O3/GdAlO3 eutectic ceramic with large smooth surface by selective laser melting: Rapid solidification behavior and thermal field simulation

Fabrication and properties of alumina ceramics shaped by digital light processing as an additive manufacturing technology

Direct additive manufacturing of TiCp reinforced Al2O3-ZrO2 eutectic functionally graded ceramics by laser directed energy deposition

Predicting rapid growth behavior in solidified eutectic ceramic composites using infrared thermal imaging and thermal field simulation during laser directed energy deposition

Morphology and formation mechanism of cracks in Al2O3–ZrO2 eutectic ceramics fabricated via laser powder bed fusion

Dynamics of the laser–powder interaction in the Ti6Al4V powder feeding process of laser-directed energy deposition additive manufacturing

Fabrication of fine and complex lattice structure Al2O3 ceramic by digital light processing 3D printing technology

Effect of forming strategy on surface morphology and properties of zirconia ceramics formed by laser powder bed fusion

Large-size Complex-Structure Ternary Eutectic Ceramic Fabricated Using Laser Powder Bed Fusion Assisted with Finite Element Analysis

Enhanced 3D Printing and Crack Control in Melt-Grown Eutectic Ceramic Composites with High-Entropy Alloy Doping