Abstract:Abstract Al 2 O 3 /Al 6 Ti 2 O 13 composite ceramics with low thermal expansion properties are promising for the rapid preparation of large-scale and complex components by directed energy deposition-laser based (DED-LB) technology. However, the wider application of DED-LB technology is limited due to the inadequate understanding of process conditions. The shaping quality, microstructure, and mechanical properties of Al 2 O 3 /Al 6 Ti 2 O 13 (6 mol% TiO 2 ) composite ceramics were systematically investigated as a function of energy input in an extensive process window. On this basis, the formation mechanism of solidification defects and the evolution process of microstructure were revealed, and the optimized process parameters were determined. Results show that high energy input improves the fluidity of the molten pool and promotes the uniform distribution and full growth of constituent phases, thus, facilitating the elimination of solidification defects, such as pores and strip gaps. In addition, the microstructure size is strongly dependent on the energy input, increasing when the energy input increases. Moreover, the morphology of the α -Al 2 O 3 phase gradually transforms from cellular into cellular dendrite with increasing energy input due to changing solidification conditions. Under the comprehensive influence of solidification defects and microstructure size, the fracture toughness and flexural strength of Al 2 O 3 /Al 6 Ti 2 O 13 composite ceramics present a parabolic law behavior as the energy input increases. Optimal shaping quality and excellent mechanical properties are achieved at an energy input range of 0.36−0.54 W*min 2 g −1 mm −1 . Within this process window, the average microhardness, fracture toughness, and flexural strength of Al 2 O 3 /Al 6 Ti 2 O 13 composite ceramics are up to 1640 Hv, 3.87 MPa m 1/2 , and 227 MPa, respectively. This study provides practical guidance for determining the process parameters of DED-LB of melt growth Al 2 O 3 /Al 6 Ti 2 O 13 composite ceramics.

Experimental investigation on Laser Directed Energy Deposition based additive manufacturing of Al2O3 bulk structures

Insights into the influence of powder particle shape on forming process and mechanical properties of Al2O3 ceramic fabricated by laser directed energy deposition

One-step additive manufacturing and microstructure evolution of melt-grown Al2O3/GdAlO3/ZrO2 eutectic ceramics by laser directed energy deposition

Effects of Laser Rescanning on Microstructure and Mechanical Properties of Al-10Si-1Mg Alloy Produced by Laser-Directed Energy Deposition

Investigations of the processing–structure–performance relationships of an additively manufactured AlSi10Mg alloy via directed energy deposition

Investigation of melt-growth alumina/aluminum titanate composite ceramics prepared by directed energy deposition

Evolution of microstructure and mechanical property of Ti-47Al-2Cr-2Nb intermetallic alloy by laser direct energy deposition: From a single-track, thin-wall to bulk

Directed energy deposition additive manufacturing of a Sc/Zr-modified Al–Mg alloy: Effect of thermal history on microstructural evolution and mechanical properties

A novel Al-Cr-Sc-Zr alloy additively manufactured via laser directed energy deposition: Microstructure, phase analysis and mechanical properties

Effect of laser additive manufacturing on the microstructure and mechanical properties of TiB2 reinforced Al-Cu matrix composite

Directed energy deposition of PH 13–8 Mo stainless steel: microstructure and mechanical property analysis

Laser Directed Energy Deposition of an AlMgScZr-Alloy in High-Speed Process Regimes

Processing and Thermal Diffusivity Measurements of Compositionally Graded Al-12Si to Al2O3 Structures

Microstructures and mechanical properties of additively manufactured alumina ceramics with digital light processing

Direct laser melting of Al2O3 ceramic paste for application in ceramic additive manufacturing

Ti6Al4V Thin Walls Production using Laser Directed Energy Deposition (L-DED) Process

Post-processing of additively manufactured IN625 thin-walled structures using laser remelting in directed energy deposition

Phase transformation and microstructural evolution in Al-Mn-Fe-Si 3104 aluminum alloy made by laser directed energy deposition

Melt-grown behaviour of heat treated high-purity alumina ceramics prepared by laser directed energy deposition

Direct additive manufacturing of TiCp reinforced Al2O3-ZrO2 eutectic functionally graded ceramics by laser directed energy deposition

Fabrication and properties of alumina ceramics shaped by digital light processing as an additive manufacturing technology