Abstract:Recently, laser additive manufacturing (LAM) of Al–Mg–Sc–Zr alloys has been considered an important method for developing a new generation of high-performance Al alloys. However, one of the key differences between LAM and conventional casting/wrought processes is that it has a unique combination of rapid solidification and in-situ solid-state transformation induced by repeated thermal cycling during deposition. In addition, owing to its near-net shape characteristics, subsequent plastic deformation processing is typically not an option to improve the as-built microstructure. To gain insight into the effect of the complex thermal history during LAM on the microstructural evolution and mechanical properties of the novel alloy systems, an Al–Mg–Sc–Zr alloy was processed via laser-directed energy deposition (L-DED) using a substrate with air cooling (AC) or water cooling (WC). The results show that the solidification microstructure was closely related to the dynamic solidification conditions in the molten pool, which promoted the transition from an equiaxed grain structure at low cooling rate (AC) to a heterogeneous grain structure at high cooling rate (WC). Furthermore, in-situ precipitation occurred during the repeated high-temperature thermal cycling in the AC sample, while it was effectively suppressed in the WC sample by lowering the peak temperature during thermal cycling. After aging, the yield strength of the WC sample was enhanced to ∼2 times that of the AC sample, while the uniform elongation was still comparable to that of the AC sample. To achieve good mechanical properties for L-DED-processed Al–Mg–Sc–Zr alloys, it is crucial to conduct integrated control of the thermal history during both rapid solidification and in-situ precipitation.

Phase transformation and microstructural evolution in Al-Mn-Fe-Si 3104 aluminum alloy made by laser directed energy deposition

Directed energy deposition of Al-Mg-Si alloys with fully-equiaxed microstructure and isotropic high strength/ductility

Investigations of the processing–structure–performance relationships of an additively manufactured AlSi10Mg alloy via directed energy deposition

Evolution of microstructure and mechanical property of Ti-47Al-2Cr-2Nb intermetallic alloy by laser direct energy deposition: From a single-track, thin-wall to bulk

Microstructure and Mechanical Properties of Ti60-Ti2alnb Functionally Graded Materials Fabricated by Laser Directed Energy Deposition

Directed energy deposition additive manufacturing of a Sc/Zr-modified Al–Mg alloy: Effect of thermal history on microstructural evolution and mechanical properties

Microstructure evolution and tensile property of TiAl alloy using continuous direct energy deposition technique

Phase evolution and mechanical properties of Al x CoCrFeNi high-entropy alloys by directed energy deposition

Investigation of α phase evolution and tensile fracture behavior of Ti5Al2Sn2Zr4Mo4Cr alloy fabricated by directed energy deposition

Effects of Laser Rescanning on Microstructure and Mechanical Properties of Al-10Si-1Mg Alloy Produced by Laser-Directed Energy Deposition

A novel Al-Cr-Sc-Zr alloy additively manufactured via laser directed energy deposition: Microstructure, phase analysis and mechanical properties

Monte Carlo simulations of solidification and solid-state phase transformation during directed energy deposition additive manufacturing

Evolution of microstructure and mechanical properties in the molten pool of γ-TiAl alloy synthesized in situ by dual-wire-fed electron beam directed energy deposition.

Microstructure-property gradients in the GH4099 superalloy fabricated by directed energy deposition and its response to heat treatment

The role of substrate preheating on the microstructure, roughness, and mechanical performance of AISI 316L produced by directed energy deposition additive manufacturing

Effect of T6 heat treatment on microstructure and mechanical properties of Al–18Si–10Cu–10Ni–5Mn–5Mg alloy prepared by laser-directed energy deposition

Microstructure and fracture behavior of 90W-7Ni-3Fe alloy fabricated by laser directed energy deposition

Microstructure and Mechanical Behavior of Additively Manufactured CoCrFeMnNi High-Entropy Alloys: Laser Directed Energy Deposition versus Powder Bed Fusion*

Rolling-assisted direct energy deposited Inconel 718: Microstructural evolution and mechanical properties after optimized heat treatment

Composition fine-tuning for directed energy deposition of Ti-6Al-4V

Effect of Heat Treatment on Microstructure and Mechanical Properties of Direct Energy Deposited AlCoCrFeNi2.1