Abstract:Different heat treatment processes, such as welding and coating, involved in the manufacturing process of DD5 single crystal high-temperature alloy parts were studied through heat process simulation experiments to investigate their potential effects on material structure and mechanical properties. The results showed that after undergoing standard heat treatment, the γ′ phase of DD5 alloy decreased in cubic degree and slightly increased in size. The interface between the matrix γ phase and the reinforcing phase γ′ became non-straight and had a slightly serrated shape. Further coating processes led to further increases in the size of the γ′ phase, and some γ′ phases showed obvious connectivity. The serrated shape morphology of the interface between the γ phase and the γ′ phase disappeared. The influence of welding and coating processes on the tensile properties at high temperatures of 870 °C was relatively small, while the effects on the long-term durability at 1093 °C were significant, with reductions of approximately 17.5% and 33.2% compared to standard heat treatment, respectively. When the heat processes of welding and coating were incorporated into the standard heat treatment process, the size of the γ′ phase also increased, and the cubic degree of the γ′ phase decreased. The interface between the matrix and the reinforcing phase also showed some degree of roughening. The tensile strength of the treated DD5 alloy at 870 °C did not change significantly, while the tensile plasticity slightly increased. The long-term durability at 1093 °C decreased by approximately 40.1% compared to standard heat treatment. The influence of heat processes on the microstructure of DD5 alloy parts during the manufacturing process was analyzed, and the corresponding relationship between the changes in microstructure and phase morphology and high-temperature performance was discussed.

Microstructure-property gradients in the GH4099 superalloy fabricated by directed energy deposition and its response to heat treatment

Mechanical Properties and Fracture Behavior of Laser Powder-Bed-Fused GH3536 Superalloy

Difference of properties after heat treatment between GH4169 and GH3536 alloys fabricated by direct energy deposition

Microstructural evolution of GH4079 superalloy during hot deformation and heat treatment

Microstructure evolution in GH4742 superalloy by combining hot deformation and heat treatment

In-situ Study of Microstructure and Mechanical Properties of GH3536 Alloy Manufactured by Selective Laser Melting at 750 °C

Influence of Various Heat Treatments on Microstructures and Mechanical Properties of GH4099 Superalloy Produced by Laser Powder Bed Fusion

Microstructure And Mechanical Properties Of Laser Melting Deposited Gh4169 Superalloy

Microstructure evolution and mechanical properties of wire-fed electron beam directed energy deposition repaired GH4169 superalloy

Investigation of Hot Working Performance and Microstructure Evolution of GH1059 Superalloy Based on Processing Map

Phase transformation and microstructural evolution in Al-Mn-Fe-Si 3104 aluminum alloy made by laser directed energy deposition

The 650 °C Tensile Deformation of Graded IN718-René41 Superalloy Fabricated by Laser Blown-Powder Directed Energy Deposition

Evolution of microstructure and mechanical properties in the molten pool of γ-TiAl alloy synthesized in situ by dual-wire-fed electron beam directed energy deposition.

Microstructure characterization of gradient composition between TC25G and TiAl alloys prepared by directed energy deposition technique

Thermal deformation behavior and microstructure evolution of GH141 superalloy during double-cone gradient compression

Thermal deformation behavior and microstructure evolution of GH4169 superalloy under the shear-compression deformation conditions

Influence of Heat Process on Microstructure and Mechanical Properties of DD5 Single Crystal Superalloy During Manufacturing

Microstructural evolution of nickel-based single crystal superalloy fabricated by directed energy deposition during heat treatment

Effect of Heat Treatment on Microstructure and Mechanical Properties of a Selective Laser Melting Processed Ni-Based Superalloy GTD222

Microstructure evolution and tensile property of TiAl alloy using continuous direct energy deposition technique

Effects of Deformation Processing Parameters on the Microstructure Evolution and Microhardness of GH4169 Superalloy during Annealing Treatment