Abstract:Powder metallurgy generally is a preferred method to consolidate and prepare some refractory metals considering their high melting temperatures. However, sintering such materials to high density while maintaining fine grain structure is challenging, and generally require ultrahigh temperature or need to be assisted by external pressure. Especially, the preparation of nanostructured oxide dispersion strengthened (ODS) refractory metals at low temperature is more difficult because grain coarsening and densification are simultaneously hindered by the common oxide addition. Thus, it is of great sense to explore a kind of oxide that can be used as both strengthening phase and sintering accelerator. In this work, after extensive theoretical calculation and experimental observation, it is found that the accelerated sintering at low temperature can be achieved in W-HfO2 system. In the absence of external pressure or activator, this system can be rapidly densified without undesirable grain coarsening at a relative low temperature of only 1480 ˚C. Through kinetic analysis and density functional theory (DFT) calculation, it was confirmed that the intergranular HfO2 particles provide a rapid diffusion transport pathway for W atoms in support of densification at temperature of interest. As a result, this alloy exhibits a homogeneous microstructure with ∼97% relative density and ∼200 nm grain size, which renders our alloy with an ultrahigh compressive strength of ∼3 GPa, much higher than the reported values. We believe that the accelerated sintering mechanism found in our W-HfO2 system can be applicable to other refractory metals to prepare high-density nanocrystalline alloys with excellent properties.

W‐Ni‐Fe refractory alloy sintered by hot oscillating pressure under different amplitudes

Hot oscillatory pressure sintered W–Ni–Fe refractory alloy under different sintering pressures: Microstructures, densification behavior and properties

The effects of oscillating frequency on microstructure and hardness of W‐Ni‐Fe refractory alloy sintered by hot oscillating pressure

Sintering process in hot oscillatory pressure of 90W–7Ni–3Fe refractory alloy at different time

High-pressure Preparation of Bulk Tungsten Material with Near-Full Densification and High Fracture Toughness

Oscillating pressure sintered W-Cu refractory alloy with high density and hardness under lower temperature

Microstructure and properties of AlCoCrNiFe high-entropy alloy sintered by hot oscillating pressing

W-Ti refractory alloy with high hardness forged using dynamic pressure-assisted hot pressing

Influence of sintering temperature on microstructure and properties of 90W-10Ti alloy targets prepared by hot oscillating pressing

Microstructures and Properties of AlCoCrNiFe High-Entropy Alloy Sintered by Hot Oscillating Pressing Under Different Sintering Times

Accelerated sintering of high-performance oxide dispersion strengthened alloy at low temperature

Hot oscillatory pressure preparing low-cost FGH4096 superalloys with high performance

Hot oscillating pressed FGH4096 nickel-based alloy with enhanced ductility and strength

Microstructure and Mechanical Properties of a Hot-Hydrostatically Extruded 93w–4.9ni–2.1fe Alloy

Fabrication and Characterization of Tungsten Heavy Alloys with High W Content by Powder Metallurgy

Research on hot isostatic pressing sintering behavior of 90W–Ni–Fe–Cu alloy

Research on hot isostatic pressing sintering behavior of 90W-Ni-Fe-Cu alloy

Microstructure and properties of liquid-phase sintered tungsten heavy alloys by using ultra-fine tungsten powders

Research on Microstructure, Mechanical Properties, and High-Temperature Stability of Hot-Rolled Tungsten Hafnium Alloy

Ultrafine Grain Tungsten Heavy Alloys with Excellent Performance Prepared by Spark Plasma Sintering

Effect of La2O3 content on the densification, microstructure and mechanical property of W-La2O3 alloy via pressureless sintering