Abstract:With the discovery of high entropy alloys, new materials with superior properties have emerged. According to recent research, high-entropy alloys' multi-component structure and mixing entropy have made them more prominent than other alloys. Because of their excellent chemical and mechanical properties—such as high hardness, high-temperature resistance, high wear resistance, chemical stability, and high corrosion resistance—high entropy alloys outperform other material types in various applications. A new grade of mechanically alloyed high entropy alloy (HEA) of composition 23Fe-21Cr-18Ni-20Ti-18Mn was consolidated by a hot isostatic pressing (HIP) at a temperature of 1000 °C, at different sintering time of 30, 60, and 90 min respectively. We have investigated the impact of sintering time on the microstructure, mechanical, corrosion, and wear-resistance properties. The x-ray diffraction (XRD) spectra of the 30 min HIPed HEA sample showed dominant s-FeCr phases and traces of γ-Fe, and the Ni-Ti phases. Whereas, the 90 min HIPed HEA samples showed more dominant Ni-Ti and traces of γ-Fe, and β-Mn phases. There is a phase transformation from BCC to HCP of consolidated HEA at increased holding time. The density of the samples increases from 5.882 to 6.327 g cm −3 and the porosity percentage decreases from 12.93 to 6.35% with the increase in the holding time. The Vickers microhardness value for 30, 60, and 90 min HIPed 23Fe-21Cr-18Ni-20Ti-18Mn HEA at 1000 °C was found to be 433, 513, and 793 HV respectively at an indentation load of 0.1 kgf. The consolidated HEA sample undergoes an abrasive and oxidative wear mechanism with ploughing and plastic deformation modes. The morphology of the wear debris was investigated using SEM. The 90 min sintered sample showed an excellent corrosion resistance due to the high rate of material densification and minimum surface flaws.

Microstructures and Properties of AlCoCrNiFe High-Entropy Alloy Sintered by Hot Oscillating Pressing Under Different Sintering Times

Microstructure and properties of AlCoCrNiFe high-entropy alloy sintered by hot oscillating pressing

Sintering process in hot oscillatory pressure of 90W–7Ni–3Fe refractory alloy at different time

Structural and Comprehensive Performance of CoCrFeMnNi High-Entropy Alloys via Fast Hot-Pressed Sintering: Effect of Sintering Temperature

Microstructure and Properties of CoCrNiFeMnAl0.5 High-Entropy Alloys Prepared by Gas Atomization Combined with Oscillatory Pressure Sintering

Microstructure, Mechanical Properties, and Damping Capacity of AlxCoCrFeNi High-Entropy Alloys Prepared by Spark Plasma Sintering

Effect of Annealing on Microstructure and Mechanical Properties for As-Sintered Co-free Al1·8CrCuFeNi2 High Entropy Alloy

Hot isostatic pressing of ball milled novel grade high entropy alloys at different sintering time and the investigation of their mechanical and corrosion resistance properties

AlCoCrFeNi High Entropy Alloy Reinforced Cu-based Composite with High Strength and Ductility after Hot Extrusion

Microstructure and mechanical properties of CoCrFeNiTa high entropy alloy prepared by mechanical alloying and spark plasma sintering

Hot oscillatory pressure sintered W–Ni–Fe refractory alloy under different sintering pressures: Microstructures, densification behavior and properties

Microstructure evolution, phase decomposition and transition of Al0.8Co0.5Cr1.5CuFeNi HEA during high temperature sintering and mechanical properties corresponding to different microstructures

Effects of milling time and sintering temperature on the mechanical properties of 8 wt% WC/AlCoCrFeNiTi 0.5 high entropy alloy matrix composite

Mechanical properties and water vapour corrosion behaviour of Al x CoCrFeNi high-entropy alloys

Effect of SLM Processing Parameters on Microstructures and Mechanical Properties of Al<sub>0.5</sub>CoCrFeNi High Entropy Alloys

Microstructure and Properties of NiCoCrAlTi High Entropy Alloy Prepared Using MA-SPS Technique

Effect of Al content in CoCrFeNiAl x HEA on mechanical properties and high temperature oxidation resistance of WC-10%CoCrFeNiAl x hard alloy

Effect of Process Parameters on the Microstructure and Mechanical Properties of Vacuum Hot-Press Sintered Co-50 Mass% Cr Alloys

Effect of cold working and annealing on microstructure and properties of powder metallurgy high entropy alloy

Microstructures and properties of Fe1.25CoNi1.25CrxAl0.25 high-entropy alloys after cold-rolling and annealing

Enhanced Strength and Ductility in a Spark Plasma Sintered CoCrCu0·5NiAl0.5 High-Entropy Alloy Via a Double-Step Ball Milling Approach for Processing Powders