Abstract:In the direct laser deposition (DLD) process, it is common to employ constant processing parameters. The utilization of the constant parameters may lead to fluctuations in the dynamic evolution of the molten pool, primarily due to the intricate thermal effects involved, which will significantly impact the processing quality. To address this issue, this study proposed a closed-loop control approach that effectively modifies processing parameters in real time by targeting on the molten pool transient area. The type of the laser used in this study is a flat-top beam. Laser power, powder feeder rate, and scanning speed are the input variables of the study to control molten pool, considering the manufacturing system. The most suitable processing parameter to control the molten pool area was found to be the laser power by a set of orthogonal experiments, with a correlation coefficient of 0.706, and significance level of 0.002. Then, the dynamic response relationship between laser power and the molten pool area was mathematically characterized by a third-order transfer function model to simplify the complex physical model of the DLD process. Subsequently, a PID controller with a filtering coefficient and anti-windup compensation was chosen compared with the other controller. In the validation experiments, it was observed that the closed-loop processing group demonstrated improved stability in maintaining the molten pool transient area, with a notable decrease of 33.7% in variability compared to the open-loop processing group. As a result, the deposited layer of the closed-loop processing group exhibited a much more satisfying surface quality and heat affect zone than the open-loop group. This study established a third-order mathematical model of the dynamic molten pool and realized the optimization of deposition quality by controlling the molten pool transient area with an enhanced PID controller, providing a fundamental basis for improving the consistency of the direct laser deposition processing quality through the implementation of real-time feedback control of molten pool physics.

Control loop tuning by thermal simulation applied to the laser transformation hardening with scanning optics process

Model predictive control for real-time microstructure control in laser heat treatment

Adaptive Fuzzy Sliding-Mode Control for the Ti6al4v Laser Alloying Process

In-situ Controller Autotuning by Bayesian Optimization for Closed-loop Feedback Control of Laser Powder Bed Fusion Process

In-layer Thermal Control of a Multi-layer Selective Laser Melting Process

Real-time closed-loop control of molten pool transient area in direct laser deposition via PID algorithm with enhanced robustness

Model-Based input energy control for reproducible AISI 316L laser deposited tracks

Laser Surface Transformation Hardening for Automotive Metals: Recent Progress

Infrared observations and finite element modeling of a laser transmission welding process

A Novel Thermodynamic Model and Temperature Control Method of Laser Soldering Systems

Identification and qualification of temperature signal for monitoring and control in laser cladding

Data-based thermodynamic model and feedforward-PI control method for laser soldering

A Design Method of Temperature Controller for High-Precision Laser

Laser‐Based Closed‐Loop Controlled Heat Treatment for Residual Stress Relief of Additively Manufactured AlSi10Mg Components

Optical System for On-Line Monitoring and Temperature Control in Selective Laser Melting Technology

Monitoring the laser cutting process by IR thermography

Optimal control of the temperature by the laser path and the thermal treatment time in selective laser melting process

Temperature control during laser vessel welding

Temperature Field Simulation On Ti6a14v And Incone1718 Heated By Continuous Infrared Laser

Analytical Modelling of Scanning Strategy Effect on Temperature Field and Melt Track Dimensions in Laser Powder Bed Fusion

Investigation of Two Laser Heat Treatment Strategies for Local Softening of a Sheet in Age-Hardening Aluminum Alloy by Means of Physical Simulation