Abstract:In the direct laser deposition (DLD) process, it is common to employ constant processing parameters. The utilization of the constant parameters may lead to fluctuations in the dynamic evolution of the molten pool, primarily due to the intricate thermal effects involved, which will significantly impact the processing quality. To address this issue, this study proposed a closed-loop control approach that effectively modifies processing parameters in real time by targeting on the molten pool transient area. The type of the laser used in this study is a flat-top beam. Laser power, powder feeder rate, and scanning speed are the input variables of the study to control molten pool, considering the manufacturing system. The most suitable processing parameter to control the molten pool area was found to be the laser power by a set of orthogonal experiments, with a correlation coefficient of 0.706, and significance level of 0.002. Then, the dynamic response relationship between laser power and the molten pool area was mathematically characterized by a third-order transfer function model to simplify the complex physical model of the DLD process. Subsequently, a PID controller with a filtering coefficient and anti-windup compensation was chosen compared with the other controller. In the validation experiments, it was observed that the closed-loop processing group demonstrated improved stability in maintaining the molten pool transient area, with a notable decrease of 33.7% in variability compared to the open-loop processing group. As a result, the deposited layer of the closed-loop processing group exhibited a much more satisfying surface quality and heat affect zone than the open-loop group. This study established a third-order mathematical model of the dynamic molten pool and realized the optimization of deposition quality by controlling the molten pool transient area with an enhanced PID controller, providing a fundamental basis for improving the consistency of the direct laser deposition processing quality through the implementation of real-time feedback control of molten pool physics.

Ti6A14V Laser Alloying Process Control by Using a Self-Organizing Fuzzy Controller

Adaptive Fuzzy Sliding-Mode Control for the Ti6al4v Laser Alloying Process

Design of a hybrid adaptive fuzzy and neural network controller for nonlinear laser alloying process.

Ti6Al4V laser alloying process monitoring by using adaptive neural network controller

Radial Basis Function Sliding-Mode Control For The Laser Alloying Process

Self-organizing Fuzzy Controller for the Molten Steel Level Control of a Twin-Roll Strip Casting Process

Electrothermal Response Optimization of Nozzle Structure for Multi-Material Rapid Prototyping Based on Fuzzy Adaptive Control

A Neuron Model-Free Controller with Fuzzy Tuning Gain for Continuous Steel Casting Processes

Hybrid Adaptive Fuzzy and Neural Network Controller for the Molten Steel Level Control in Strip Casting Processes.

Decoupling Control Design and Simulation of Aluminum Alloy Pulsed MIG Welding Based on Dynamic PLS Framework

Adaptive neural network controller for the molten steel level control of strip casting processes

Adaptive radial basis function sliding-mode controller for the molten steel level control of strip casting processes

Design and Adaptive Terminal Sliding Mode Control of a Fast Tool Servo System for Diamond Machining of Freeform Surfaces

A Fuzzy Control Approach Based On Multi-Sensor Management And Its Application

The Temperature Control of Laser Thermal Desorption System Based on Parameters Self-Tuning Fuzzy PID Algorithm

Data-based thermodynamic model and feedforward-PI control method for laser soldering

Economic Operation of a Fluid Catalytic Cracking Process Using Self-Optimizing Control and Reconfiguration

Real-time closed-loop control of molten pool transient area in direct laser deposition via PID algorithm with enhanced robustness

In-situ Controller Autotuning by Bayesian Optimization for Closed-loop Feedback Control of Laser Powder Bed Fusion Process

Self-Organizing Fuzzy Controller for Gas-Assisted Injection Molding Combination Systems

Model predictive control for real-time microstructure control in laser heat treatment