Abstract:Numerical simulation of laser cladding is the main research topics for many universities and academes, but all researchers used the Gaussian laser light source. Due to using inside-beam powder feeding for laser cladding, the laser is dispersed by the cone-shaped mirror, and then be focused by the annular mirror, the laser can be assumed as the light source of uniform intensity.In this paper,the temperature of powder during landing selected as the initial conditions, and adopting the life-and-death unit method, the moving point heat source and the uniform heat source are realized. In the thickness direction, using the small melt layer stacking method, a finite element model has been established, and layer unit is acted layer by layer, then a virtual reality laser cladding manu-facturing process is simulated. Calculated results show that the surface temperature of the cladding layer depends on the laser scanning speed, powder feed rate, defocus distance. As cladding layers increases, due to the heat conduction into the base too late, bath temperature will gradually increase. The highest temperature is not at the laser beam, but at the later point of the laser beam. In the clad-ding process, the temperature cooling rate of the cladding layer in high temperature section is great, and in the low-temperature, cooling rate is relatively small. These conclusions are also similar with the normal laser cladding. Finally, some experiments validate the simulation results. The trends of simulating temperature are fit to the actual temperature, and the temperature gradient can also ex-plain the actual shape of cross-section.

Identification and qualification of temperature signal for monitoring and control in laser cladding

Temperature Field Simulation and Experimental Analysis of Laser Cladding 45 Steel.

Real-Time Quality Monitoring of Laser Cladding Process on Rail Steel by an Infrared Camera

Measurement of the Molten Pool Image During Laser Cladding Process

Quantitative analysis and experimental study of the influence of process parameters on the evolution of laser cladding

Research on Measurement of the Molten Pool Image During Laser Cladding Process

Thermal Based Process Monitoring for Laser Powder Bed Fusion (LPBF)

A Comparative Study of Vision Detection and Numerical Simulation for Laser Cladding of Nickel-Based Alloy

Realtime monitoring research of melt pool images in laser cladding process

Multi-objective Numerical Simulation of Geometrical Characteristics of Laser Cladding of Cobalt-Based Alloy Based on Response Surface Methodology

In Situ, Parallel Monitoring of Relative Temperature, Material Emission, and Laser Reflection in Powder-Blown Directed Energy Deposition

Numerical Simulation and Experimental Investigation of Coaxiality Change of Laser Cladding Rotor Shaft

Numerical Simulation on Temperature Field in Multi-Layers Inside-Beam Powder Feeding when Laser Cladding

Molten Area Detection in Laser Cladding Based on Vision Detection

Assessment of in-situ reaction temperatures under laser condition by combining numerical calculation and experiments

Machine Vision-based in Situ Monitoring of Laser Cladding Molten Pool Features

Numerical simulation of the three-dimensional temperature field in laser cladding forming process

Monitoring the laser cutting process by IR thermography

Researches on the Temperature Field During the Process of Reparation by Laser Cladding Through Simulation and Experiments

A temperature control system for laser welding of plastics differing in optical parameters

Optical System for On-Line Monitoring and Temperature Control in Selective Laser Melting Technology