Abstract:The field of application of multilayer polymer films ranges from the packaging of food and other goods to medical technology and the encapsulation of organic electronics. The layer structure of the polymer films is adapted to the respective areas of application. Usually, polymer film systems contain several individual layers. A trend toward more flexible production and batch sizes down to one can be identified in all the above-mentioned areas of application. This requires new production processes. Laser transmission welding with adapted laser beam sources represents a promising approach for this. It is characterized by a contactless and a locally limited energy position. A very high degree of format flexibility is also possible, thanks to a purely numerical adjustment of the welding contour. In many applications, it is desired to keep the polymer film as it is available on the market. If two multilayer polymer films should be welded with laser radiation in an overlapping arrangement, sufficient absorption of the laser radiation in the material is required. Each individual polymer layer has wavelength-dependent material-specific optical properties. Due to the vibrations of polymer chains, polymers have absorption peaks in the near infrared range. If a suitable laser beam source is now used for the welding process, the energy can be deposited directly in the material without modifying it beforehand. The energy input should be the highest at the point of contact or in the sealing layers of the two polymer films so that it is locally heated and melted. The surrounding film layers are also thermally influenced by heat conduction processes. In addition, the optical properties of the other layers influence the propagation of the laser radiation through the multilayer polymer film. For a comprehensive understanding of the process, it is imperative to examine these processes in detail. Therefore, the interaction process is considered in depth and, especially, the propagation of the temperature field within the material, which is not directly accessible for real measurements, is analyzed exactly. For this purpose, on the one hand, a numerical temperature model is set up, which depicts the real experimental setup and takes into account the optical properties and heat conduction variables of the individual layers. The numerical model allows the temporal resolution of interaction processes within the multilayer polymer film to be viewed from different angles. On the other hand, thermographic images of the real samples are taken during the welding process. For this purpose, the emitted heat radiation of the polymer films is measured off-axis. The data obtained are evaluated and compared with each other. For the final discussion of the results, additional analyses of the weld specimens microscopy and thin sections are used.

Evaluation of a pyrometric-based temperature measuring process for the laser transmission welding

Process Monitoring at Laser Welding of Thermoplastics

Two-Color-Thermography for Temperature Determination in Laser Beam Welding of Low-Melting Materials

Frontal pyrometric snapshot measurements of the keyhole wall temperature in laser welding of pure aluminium

Temperature control during laser vessel welding

Thermal Based Process Monitoring for Laser Powder Bed Fusion (LPBF)

Infrared observations and finite element modeling of a laser transmission welding process

A Thermal Analysis of LASER Beam Welding Using Statistical Approaches

Synchrotron EDXRD strain-temperature measurement during laser welding

ICONE19-43939 Phenomenological Evaluation of Laser-Irradiated Welding Processes with a Combined Use of Higher-Accuracy Experiments and Computational Science Methodologies : (5) Numerical Simulation of the Welding Processes with a Multi-Dimensional Multi-Physics Analysis Code SPLICE

Identification and qualification of temperature signal for monitoring and control in laser cladding

Analysis of the interaction process during laser transmission welding of multilayer polymer films with adapted laser wavelength by numerical simulation and thermography

A temperature control system for laser welding of plastics differing in optical parameters

Single-camera Two-Wavelength Imaging Pyrometry for Melt Pool Temperature Measurement and Monitoring in Laser Powder Bed Fusion based Additive Manufacturing

Challenges in dynamic heat source modeling in high-power laser beam welding

Simulation of Laser Heating of Aluminum and Model Validation via Two-Color Pyrometer and Shape Assessment

Fast Multi-Wavelength Pyrometer for Dynamic Temperature Measurements

Pixelwise high-temperature calibration for in-situ temperature measuring in powder bed fusion of metal with laser beam

Processing of Keyhole Depth Measurement Data during Laser Beam Micro Welding

Process Monitoring Using Synchronized Path Infrared Thermography in PBF-LB/M

Long wavelength infrared radiation thermometry for non-contact temperature measurements in gas turbines