Abstract:High cooling rates within the selective laser melting (SLM) process can generate large residual stresses within fabricated components. Understanding residual stress development in the process and devising methods for in-situ reduction continues to be a challenge for industrial users of this technology. Computationally efficient FEA models representative of the process dynamics (temperature evolution and associated solidification behaviour) are necessary for understanding the effect of SLM process parameters on the underlying phenomenon of residual stress build-up. The objective of this work is to present a new modelling approach to simulate the temperature distribution during SLM of Ti6Al4V, as well as the resulting melt-pool size, solidification process, associated cooling rates and temperature gradients leading to the residual stress build-up. This work details an isotropic enhanced thermal conductivity model with the SLM laser modelled as a penetrating volumetric heat source. An enhanced laser penetration approach is used to account for heat transfer in the melt-pool due to Marangoni convection. Results show that the developed model was capable of predicting the temperature distribution in the laser/powder interaction zone, solidification behaviour, the associated cooling rates, melt-pool width (with 14.5% error) and melt-pool depth (with 3% error) for SLM Ti6Al4V. The model was capable of predicting the differential solidification behaviour responsible for residual stress build-up in SLM components. The model-predicted trends in cooling rates and temperature gradients for varying SLM parameters correlated with experimentally measured residual stress trends. Thus, the model was capable of accurately predicting the trends in residual stress for varying SLM parameters. This is the first work based on the enhanced penetrating volumetric heat source, combined with an isotropic enhanced thermal conductivity approach. The developed model was validated by comparing FEA melt-pool dimensions with experimental melt-pool dimensions. Secondly, the model was validated by comparing the temperature evolution along the laser scan path with experimentally measured temperatures from published literature.

In-layer Thermal Control of a Multi-layer Selective Laser Melting Process

Layer-to-Layer Melt Pool Control in Laser Powder Bed Fusion

A Thermo-Metallurgical-mechanical Model for Selective Laser Melting of Ti6Al4V

Numerical Modelling and Experimental Validation of Selective Laser Melting Processes Using a Custom Argon Chamber Setup for 316L Stainless Steel and Ti6AI4V

A Simulation Study on the Effect of Residual Stress on the Multi-Layer Selective Laser Melting Processes Considering Solid-State Phase Transformation

Numerical Study of the Pore Defects Formation Mechanisms in Selective Laser Melting Process

Powder-scale Multi-Physics Modeling of Multi-Layer Multi-Track Selective Laser Melting with Sharp Interface Capturing Method

Batch Model Predictive Control for Selective Laser Melting

Mesoscale Modelling of Selective Laser Melting: Thermal Fluid Dynamics and Microstructural Evolution

PARTICLE SCALE NUMERICAL MODELLING OF HEAT TRANSFER AND MELT POOL DYNAMICS IN SELECTIVE LASER MELTING

Feedback Control of Melt Pool Area in Selective Laser Melting Additive Manufacturing Process

Layered and Subregional Control Strategy Based on Model-Free Adaptive Iterative Learning for Laser Additive Manufacturing Process

Finite Element Analysis of Thermal Stress and Thermal Deformation in Typical Part during SLM

Micro-scale thermodynamic model of microstructure and stress evolution in parts via selective laser melting

Finite Element Analysis of Thermal Behavior and Experimental Investigation of Ti6Al4V in Selective Laser Melting

Simulation of the Solute Transport and Microstructure Evolution During the Selective Laser Melting Process

Control-Oriented Modeling and Layer-to-Layer Spatial Control of Powder Bed Fusion Processes

Simulation of temperature field and stress field of selective laser melting of multi-layer metal powder

Modeling and Simulation of the Temperature Field of Selective Laser Sintering

Residual stress development in selective laser-melted Ti6Al4V: a parametric thermal modelling approach