Abstract:A key challenge encountered by printed electronics is that the conductivity of sintered metal nanoparticle (NP) traces is always several times smaller than the bulk metal conductivity. Identifying the relative roles of the voids and the residual polymers on NP surfaces in sintered NP traces, in determining such reduced conductivity, is essential. In this paper, we employ a combination of electron microscopy imaging and detailed simulations to quantify the relative roles of such voids and residual polymers in the conductivity of sintered traces of a commercial (Novacentrix) silver nanoparticle-based ink. High resolution transmission electron microscopy imaging revealed details of the morphology of the inks before and after being sintered at 150 °C. Prior to sintering, NPs were randomly close packed into aggregates with nanometer thick polymer layers in the interstices. The 2D porosity in the aggregates prior to sintering was near 20%. After heating at 150 °C, NPs sintered together into dense aggregates (nanoaggregates or NAgs) with sizes ranging from 100 to 500 nm and the 2D porosity decreased to near 10%. Within the NAgs, the NPs were mostly connected via sintered metal bridges, while the outer surfaces of the NAgs were coated with a nanometer thick layer of polymer. Motivated by these experimental results, we developed a computational model for calculating the effective conductivity of the ink deposit represented by a prototypical NAg consisting of NPs connected by metallic bonds and having a polymer layer on its outer surface placed in a surrounding medium. The calculations reveal that a NAg that is 35%-40% covered by a nanometer thick polymeric layer has a similar conductivity compared to prior experimental measurements. The findings also demonstrate that the conductivity is less influenced by the polymer layer thickness or the absolute value of the NAg dimensions. Most importantly, we are able to infer that the reduced value of the conductivity of the sintered traces is less dependent on the void fraction and is primarily attributed to the incomplete removal of the polymeric material even after sintering.

A comparative study of single and dual sintering processes of metal nanoparticles for flexible electronics application

Silver Nanoparticles Based Ink with Moderate Sintering in Flexible and Printed Electronics

Reactive Sintering of Cu Nanoparticles at Ambient Conditions for Printed Electronics

A Review Of Sintering-Bonding Technology Using Ag Nanoparticles For Electronic Packaging

Sintering mechanism of size-controllable Cu-Ag core–shell nanoparticles for flexible conductive film with high conductivity, antioxidation, and electrochemical migration resistance

Comparison of the Resistivities of Nanostructured Films Made from Silver, Copper-Silver and Copper Nanoparticle and Nanowire Suspensions

Simultaneous laser sintering and embedding of silver nanoparticles for highly flexible embedded electrodes

Conformal laser printing and laser sintering of Ag nanoparticle inks: a digital approach for the additive manufacturing of micro-conductive patterns on patterned ﬂexible substrates

Sintering of Copper Nanoparticles using Intense Pulsed Light for screen-printed films on flexible substrate

Femtosecond and nanosecond laser sintering of silver nanoparticles on a flexible substrate

Ultrafast Laser-Induced Thickness-Limited Sintering of Metal Nanoparticle Film for Ultrathin Flexible Microelectronic Devices

Self-sintering liquid metal ink with LAPONITE? for flexible electronics

Laser Sintering of Various Film Compositions Used in Flexible Printed Electronics

A Green Method for Synthesizing Novel Nanoparticles and Their Application in Flexible Conductive Patterns

Direct visualization of nanoparticle morphology in thermally sintered nanoparticle ink traces and the relationship among nanoparticle morphology, incomplete polymer removal, and trace conductivity

Present status and prospects of nano-silver particles in the electronic field: a review

Multiscale simulation study of laser sintering of inkjet-printed silver nanoparticle inks

Room Temperature Sintering of Cu-Ag Core-Shell Nanoparticles Conductive Inks for Printed Electronics

Selective Electroless Metallization of Micro- and Nanopatterns via Poly(dopamine) Modification and Palladium Nanoparticle Catalysis for Flexible and Stretchable Electronic Applications.

Optimization of Intense Pulsed Light Sintering Considering Dimensions of Printed Cu Nano/Micro-paste Patterns for Printed Electronics

Optical Printing of Conductive Silver on Ultrasmooth Nanocellulose Paper for Flexible Electronics