Abstract:Alkyl-substituted dibenzothiophenes such as 4,6-dimethyldibenzothiophene are a kind of typical refractory sulfur compound in fuel oil. Herein, three-dimensional ordered macro–mesoporous (3DOM) tungsten oxide catalysts were successfully prepared for aerobic oxidative desulfurization of 4,6-dimethyldibenzothiophene. The experimental results indicated that the as-prepared material 3DOM WOx-400 not only contained a hexagonal packed nanoporous structure but also abundant oxygen defects on its skeleton, exhibiting aerobic oxidative desulfurization of over 99% in 4 h. Moreover, sulfur removal could still reach 99% after recycling five times. Through free radical capture experiments, the superoxide radical is reasonably proposed in the mechanism. This work would provide a feasible route to develop highly efficient nanoporous materials for desulfurization of fuels.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.0c02639?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.0c02639</a>.TGA profiles of the precursor with PMMA (A) and without PMMA (B) (Figure S1); FT-IR spectra of the precursor mixture at different calcination stages (Figure S2); SEM image of the PMMA sphere alloy as the template (Figure S3); macropore diameter distribution of 3DOM WOx-400 (Figure S4); Raman spectrum of commercial WO3 (Figure S5); XPS full-scan spectra of various samples (Figure S6); comparison on W 4f peaks of 3DOM WOx-400 and WOx-400 (Figure S7); W 4f core-level of 3DOM WOx-300 and 3DOM WOx-500 (Figure S8); EPR spectra of various samples (Figure S9); effect of the reaction temperature on sulfur removal in the desulfurization system (Figure S10); GC–MS analysis for the extractant of the catalyst phase after the reaction (Figure S11); SEM images of recycled 3DOM WOx-400 (Figure S12); FT-IR spectra of fresh and recycled 3DOM WOx-400 (Figure S13) (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.0c02639/suppl_file/an0c02639_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Stereolithography 3D printed monolithic catalyst for highly efficient oxidative desulfurization of fuels

Tailored monolithic catalyst and reactor by direct photo-curing 3D printing for oxidative desulfurization of fuels

Direct ink writing of Pd-Decorated Al<sub>2</sub>O<sub>3</sub> ceramic based catalytic reduction continuous flow reactor

Designing 3d‐mos2sponge As Excellent Cocatalysts in Advanced Oxidation Processes for Pollutant Control

3D Printing and Chemical Dealloying of a Hierarchically Micro- and Nanoporous Catalyst for Wastewater Purification

One-Pot Three-Dimensional Printing of a Hierarchical NiMo/Al 2 O 3 Monolithic Catalyst for 4,6-Dimethyldibenzothiophene Hydrodesulfurization

Rational Design and Construction of Monolithic Ordered Mesoporous Co 3 O 4 @SiO 2 Catalyst by a Novel 3D Printed Technology for Catalytic Oxidation of Toluene

X-ray counting efficiencies for plutonium in lungs, derived from studies with inhaled palladium-103.

3D printing of hierarchically porous lightweight activated carbon/alumina monolithic adsorbent for adsorptive desulfurization of hydrogenated diesel

A novel 3D printed technology to construct a monolithic ultrathin nanosheets Co3O4/SiO2 catalyst for benzene catalytic combustion

Efficient aerobic oxidative desulfurization via three-dimensional ordered macroporous tungsten-titanium oxides

Fabricating a Structured Single‐Atom Catalyst via High‐Resolution Photopolymerization 3D Printing

Three-Dimensional Hierarchical Porous Structures of Metallic Glass/Copper Composite Catalysts by 3D Printing for Efficient Wastewater Treatments

3D printed cross-scale structured TS-1 catalysts for continuous scale-up reactions

3D printed hierarchical spinel monolithic catalysts for highly efficient semi-hydrogenation of acetylene

3D‐Printed Structured Reactor with Integrated Single‐Atom Catalyst Film for Hydrogenation

Robust catalyst 3D microarchitectures by digital light printing with ceramic particle–polymer composites

Two‐Dimensional 1H‐nmr study of antigen–antibody interactions: Binding of synthetic decapeptides to an anti‐acetylcholine receptor monoclonal antibody

Aerobic Oxidative Desulfurization by Nanoporous Tungsten Oxide with Oxygen Defects

A Novel Method of 3D Printing High‐Loaded Oxide/H‐ZSM‐5 Catalyst Monoliths for Carbon Dioxide Reduction in Tandem with Propane Dehydrogenation

Three-dimensional ordered macroporous HPW/titania–alumina catalysts for catalytic oxidative desulfurization of fuels