Abstract:Oxidative propane dehydrogenation using CO2 (CO2‐ODHP) is a potential alternative for propylene synthesis. In this study, bifunctional catalysts (V2O5, ZrO2, Cr2O3, and Ga2O3 doped H‐ZSM‐5) are synthesized through additive manufacturing for CO2‐ODHP. Characterization and correlation between the various characterizations and the catalytic results indicates that the direct 3D printing of metal oxides alongside H‐ZSM‐5 can considerably modify the surface properties and bulk oxide phase dispersion, thus leading to enhanced metal oxide reducibility and exceptional CO2‐ODHP performance. Among the metal monoliths, the mixed oxide sample with 5 wt% Cr, 10 wt% V, 10 wt% Zr, 10 wt% Ga and 65 wt% H‐ZSM‐5 displays the best activity, achieving ≈40% propane conversion, 95% propylene selectivity, and zero benzene/toluene/xylene production. Upon eliminating CO2, the catalyst monoliths all retain their long‐term stability; however, the propane conversions decrease by ≈3% and the propylene selectivities decreased by 5–15%. Nevertheless, all five samples examined here demonstrate exceptional catalytic activities and prolonged stabilities, which are attributed to the even distribution of surface acid sites produced by direct printing of the oxide and zeolite components. Overall, this study presents a novel way of manufacturing bifunctional structured catalysts that exhibit exceptional ODHP performance. The direct synthesis of bifunctional metal oxide/HZSM‐5 with high oxide loadings is reported via a novel direct 3D printing of insoluble oxide/ZSM‐5 inks through additive manufacturing method for CO2 reduction in tandem with propane dehydrogenation. By varying the metal component in the monoliths produced by this new method, these materials achieve nearly 100% propylene selectivity and zero benzene/toluene/xylene production, high conversion, and high stability in the oxidative dehydrogenation of propane using CO2.

Tailored monolithic catalyst and reactor by direct photo-curing 3D printing for oxidative desulfurization of fuels

Stereolithography 3D printed monolithic catalyst for highly efficient oxidative desulfurization of fuels

Direct ink writing of Pd-Decorated Al<sub>2</sub>O<sub>3</sub> ceramic based catalytic reduction continuous flow reactor

3D Printing and Chemical Dealloying of a Hierarchically Micro- and Nanoporous Catalyst for Wastewater Purification

3D Printing of Hierarchically Porous Monolithic Ts‐1 Catalyst for One-Pot Synthesis of Ethylene Glycol

Rational Design and Construction of Monolithic Ordered Mesoporous Co 3 O 4 @SiO 2 Catalyst by a Novel 3D Printed Technology for Catalytic Oxidation of Toluene

3D Printing Technique Fortifies the Ultradeep Hydrodesulfurization Process of Diesel: A Journey of NiMo/Al2O3-MMT

One-Pot Three-Dimensional Printing of a Hierarchical NiMo/Al 2 O 3 Monolithic Catalyst for 4,6-Dimethyldibenzothiophene Hydrodesulfurization

A 3D-Printed CuNi Alloy Catalyst with a Triply Periodic Minimal Surface for the Reverse Water-Gas Shift Reaction

Catalytic Materials by 3D Printing: A Mini Review

3D‐Printed Structured Reactor with Integrated Single‐Atom Catalyst Film for Hydrogenation

A Novel Method of 3D Printing High‐Loaded Oxide/H‐ZSM‐5 Catalyst Monoliths for Carbon Dioxide Reduction in Tandem with Propane Dehydrogenation

3D printed Ni/Al2O3 based catalysts for CO2 methanation - a comparative and operando XRD-CT study

Coaxial 3D Printing of Zeolite-Based Core-Shell Monolithic Cu-SSZ-13@SiO2 Catalysts for Diesel Exhaust Treatment

3D Printing of Metal-Organic Frameworks Decorated Hierarchical Porous Ceramics for High-Efficiency Catalytic Degradation

In-situ fabrication of MoO 2 /Mo x C heterojunction on rodlike carbon-coated zirconia for enhanced oxidative desulfurization of fuel oils

3D‐Printed Acidic Monolithic Catalysts for Liquid‐Phase Catalysis with Enhanced Mass Transfer Properties

A novel 3D printed technology to construct a monolithic ultrathin nanosheets Co3O4/SiO2 catalyst for benzene catalytic combustion

Direct 3D Printing of Reactive Agitating Impellers for the Convenient Treatment of Various Pollutants in Water

Fabricating a Structured Single‐Atom Catalyst via High‐Resolution Photopolymerization 3D Printing

3D printing of hierarchically porous lightweight activated carbon/alumina monolithic adsorbent for adsorptive desulfurization of hydrogenated diesel