Abstract:The electrical properties of the active precursor ions play an important role in the microstructure of the hydrodesulfurization (HDS) catalyst. Herein, this study first presents a simple strategy to adjust the charge of Mo-based nanoparticles (Mo-NPs) by changing the content of the organic complexing agent dodecyltrimethylammonium bromide (DTAB) and then investigates the effects of Mo-NPs with different charges on HDS catalysts. The results show that the zeta (zeta) potential of the Mo-NPs mutates from negative to positive with the DTA+/Mo molar ratio increasing to 4/7. Compared with conventional electronegative Mo precursors, the electropositive Mo-NPs could eliminate the electrostatic difference with the promoter nickel ions (Ni2+); thus, the Mo-NPs and Ni2+ could synchronously diffuse and co-load into the electropositive pore of gamma-Al2O3 by hydrothermal deposition, resulting in a more uniform distribution of active species (standard deviation of slab length = 0.51 vs. 1.05). Meanwhile, the isolating effect of amorphous carbonaceous species from the thermal decomposition of the organic complexing agent on the active phases was directly observed, and the stabilizer role was powerfully verified. Therefore, the resultant catalyst not only realized better Ni-promoted effects (synergetic factor = 7.5 vs. 5.3) but also exhibited excellent active phase morphology with much shorter length, higher stacking number and better dispersion. Finally, compared with the catalyst prepared from the conventional precursor, i.e. Mo7O246-, the Mo-NPs-derived catalyst shows the more excellent HDS activity of dibenzothiophene (reaction rate constant kHDS = 7.51 vs. 1.06 x 10-7 mol g-1 s-1; turnover frequency TOF = 5.56 vs. 1.43 h-1) and obviously enhanced HDS ratio of heavy coking diesel (99.8% vs. 96.2%). Besides, the resulting catalyst also holds a much higher HDS ratio as compared with the industrial catalyst (99.8% vs. 97.8%), showing a great potential in industrial application. The present work sheds light on the rational design of supported nanosized catalysts and provides a deeper understanding of the complicated structure-function relations. Using electropositive Mo-based nanoparticles (Mo-NPs) as precursor could realize the resulting catalyst with more uniform, shorter, higher layered, better Ni-promoted, and stable MoS2 slabs, thus holding excellent HDS performance.

One-Pot Three-Dimensional Printing of a Hierarchical NiMo/Al 2 O 3 Monolithic Catalyst for 4,6-Dimethyldibenzothiophene Hydrodesulfurization

Synthesis of Novel NiMo Catalysts Supported on Highly Ordered TiO2-Al2O3 Composites and Their Superior Catalytic Performance for 4,6-Dimethyldibenzothiophene Hydrodesulfurization

3D Printing Technique Fortifies the Ultradeep Hydrodesulfurization Process of Diesel: A Journey of NiMo/Al2O3-MMT

Hierarchical TS-1 zeolite loaded with NiMo catalysts: Preparation and performance in hydrodesulfurization

Regulating the Microenvironments and the D-Band Center of Hierarchical Nimos/Ts-1 Catalyst by Zro2 to Enhance the Hydrodesulfurization Performance of Dibenzothiophene

The evolution of NiMo unsupported catalysts with 3DOM structure for thiophene hydrodesulfurization

Tailored monolithic catalyst and reactor by direct photo-curing 3D printing for oxidative desulfurization of fuels

Stereolithography 3D printed monolithic catalyst for highly efficient oxidative desulfurization of fuels

Fabrication of Well-Structured NiMo Hydrodesulfurization Catalysts Using Electropositive Mo-based Nanoparticles

3D Printing of Hierarchically Porous Monolithic Ts‐1 Catalyst for One-Pot Synthesis of Ethylene Glycol

Design and catalytic performance of Ni catalyst for CO 2 methanation based on DIW-3D printing

A novel and facile strategy for the preparation of highly reactive NiMo/γ-Al 2 O 3 hydrodesulfurization catalyst

Active phase morphology engineering of NiMo/Al 2 O 3 through La introduction for boosting hydrodesulfurization of 4,6-DMDBT

Hierarchically Macro-Mesoporous Ni-Mo/Al2O3 Catalysts for Hydrodesulfurization of Dibenzothiophene

3D printed hierarchical spinel monolithic catalysts for highly efficient semi-hydrogenation of acetylene

Highly stable 3D-printed monolithic Al2O3-supported Ni-based structured catalysts for dry reforming of methane

3D printed Ni/Al2O3 based catalysts for CO2 methanation - a comparative and operando XRD-CT study

Rational Design and Construction of Monolithic Ordered Mesoporous Co 3 O 4 @SiO 2 Catalyst by a Novel 3D Printed Technology for Catalytic Oxidation of Toluene

High-performance NiMoS hydrodesulfurization catalysts by one-pot hydrothermal synthesis using Ni(acac)2 for sulfur-free liquid fuels

Preparation of Ni<sub>2</sub>P/TiO<sub>2</sub>−Al<sub>2</sub>O<sub>3</sub>and the Catalytic Performance for Hydrodesulfurization of 3-Methylthiophene

Effect of Hierarchically Macro-Mesoporous Structure of NiMoS/Al2O3 Catalysts on Hydrodesulfurization Activity