Abstract:An Al‐containing MIL‐53 metal‐organic framework with very high surface area (SBET=1130 m2.g−1, N2 sorption) was used as sacrificial template to prepare a nickel‐alumina‐based catalyst (Ni0AlMIL) highly active and stable in the reaction of dry reforming of methane (DRM). The procedure consisted in impregnating the activated (solvent free) MIL‐53 sample with a nickel precursor solution, then calcining the material to remove the organic linkers and subsequently reducing it to form the reduced nickel active phase. At the step of calcination, this procedure results in the formation of a porous uniform spinel phase with Ni nanospecies embedded in the alumina‐based matrix, as deduced from XRD, TPR and TEM analyses. This leads after reduction to a porous lamellar γ‐Al2O3 material with small Ni0 nanoparticles homogeneously dispersed and stabilized within the support. The performances of this catalyst in DRM are better than those of two reference Ni/alumina catalysts prepared for comparison by conventional nickel impregnation of two preformed alumina supports: a first one obtained by calcination of MIL‐53 (AlMIL) and a second one consisting of a commercial γ‐Al2O3 batch (AlCOM). Under steady state conditions at a temperature of 650 °C and a pressure of 1 bar, the higher CH4 and CO2 conversions (till 3 times higher than on Ni0/AlCOM), high catalytic stability (no loss of activity after 13–100 h) and higher selectivity towards DRM (H2:CO products ratio remaining at 1) on Ni0AlMIL compared to the other catalysts is believed to come from the particularly strong interaction between the nickel and alumina phases generated by using the unique high specific surface of the parent MOF support to deposit nickel. This creates an intimate mixing favorable to a persisting interaction of the nickel nanoparticles with the alumina support in the reduced material. The lamellar shape of the γ‐Al2O3 composing the catalyst and its remaining high specific surface may also contribute to the excellent Ni resistance to sintering and in turn to the inhibition of carbon nanotubes formation during the reaction.

Highly stable 3D-printed monolithic Al2O3-supported Ni-based structured catalysts for dry reforming of methane

Highly Dispersed Ni Nanoparticles Supported by Porous Al2O3 Rods for Catalytic Dry Reforming of Methane

Highly dispersed Ni/Al2O3 catalysts for dry reforming of methane prepared by alkaline-induced adsorption process

Highly Stable Ni−B/Honeycomb−Structural Al2O3 Catalysts for Dry Reforming of Methane

Improved performance of Ni/Al2O3 catalyst deriving from the hydrotalcite precursor synthesized on Al2O3 support for dry reforming of methane

Unbounding the Future: Designing NiAl‐based Catalysts for Dry Reforming of Methane

Porous Nickel‐Alumina Derived from Metal‐Organic Framework (MIL‐53): A New Approach to Achieve Active and Stable Catalysts in Methane Dry Reforming

Highly dispersed Ni/MgO-mSiO2 catalysts with excellent activity and stability for dry reforming of methane

Highly dispersed Fe-decorated Ni nanoparticles prepared by atomic layer deposition for dry reforming of methane

Spherical Ni Nanoparticles Supported by Nanosheet-Assembled Al 2 O 3 for Dry Reforming of CH 4 : Elucidating the Induction Period and Its Excellent Resistance to Coking

Nickel Catalyst with Atomically-Thin Meshed Cobalt Coating for Improved Durability in Dry Reforming of Methane

Robust and Coke-free Ni Catalyst Stabilized by 1–2 nm-Thick Multielement Oxide for Methane Dry Reforming

Tuning metal-support interactions in nickel-zeolite catalysts leads to enhanced stability during dry reforming of methane

Confined High Dispersion of Ni Nanoparticles Derived from Nickel Phyllosilicate Structure in Silicalite-2 Shell for Dry Reforming of Methane with Enhanced Performance

Development of Highly Stable Ni-Al 2 O 3 Catalysts for CO Methanation

Catalytically stable monodispersed multi-core Ni-Co nanoparticles encapsulated with SiO2 shells for dry reforming of CH4 with CO2

Highly stable and coke-resistant Zn-modified Ni-Mg-Al hydrotalcite derived catalyst for dry reforming of methane: Synergistic effect of Ni and Zn

Deciphering the Stability Mechanism of Pt-Ni/Al2O3 Catalysts in Syngas Production Via DRM

3D printed Ni/Al2O3 based catalysts for CO2 methanation - a comparative and operando XRD-CT study

Enhanced Methane Dry Reforming with Ni/SiO2 Catalysts Featuring Hierarchical External Nanostructures

Modulating Proportion of Ni0 Species Stabilized by Ni2+ on Ni-MgO Catalyst with Superior Stability for Dry Reforming of Methane