Abstract:The technologic route of efficiently converting methane into higher-value liquid-phase products that are easily transported have led to an increased industrial interest in the dry reforming of methane (DRM) to produce syngas. However, the nonprecious-metal catalysts suffer from a stability issue caused by coke formation. In this work, by evaporation-induced self-assembly (EISA) method, secondary metals (M = Fe, Co, or Cu) were doped into Ni-based ordered mesoporous alumina catalyst (MNiAI). The difference in catalytic behaviors for these catalysts in DRM could be explained in term of carbon deposition. CuNiAI catalyst displayed the lowest reactivity and poor stability, while FeNiAl was catalytically active. The influence of iron content (molar ratio of Fe/Ni ranging from 0.3 to 0.9) on the catalytic performance for x-FeNiAl were further investigated. Increasing the amount of iron in the catalysts affected both the chemical and activity properties. All x-FeNiA1 catalysts showed high surface area and ordered mesoporous structure at Fe/Ni = 0-0.7, whereas the mesoporous structure was destroyed at high Fe/Ni molar ratio ( =0.9). Iron displayed a positive role in nickel-based catalysts for DRM by virtue of the formation of FeNi3 alloy species during the reduction treatment. 0.7-FeNiAl catalyst was the most active for reforming with regard to the initial activity. By comparison of STEM-EDX, XPS and XRD results for reduced and spent 0.7-FeNiAl catalysts, the deactivation after 24 h DRM reaction was associated with the dealloying of FeNi3 under reforming conditions, rather than change in porous structure and sintering of the active metal. This study demonstrated the importance in manipulating the stability of FeNi3 that are relevant to DRM conditions.

Deciphering the Stability Mechanism of Pt-Ni/Al2O3 Catalysts in Syngas Production Via DRM

Catalytic Performance of Iron-Promoted Nickel-Based Ordered Mesoporous Alumina FeNiAl Catalysts in Dry Reforming of Methane

Understanding Coke Deposition Vis-à-Vis DRM Activity over Magnesia-Alumina Supported Ni-Fe, Ni-Co, Ni-Ce, and Ni-Sr Catalysts

Dry reforming of methane over Ni/Al2O3 catalysts: Support morphological effect on the coke resistance

Effect of NiAl2O4 Formation on Ni/Al2O3 Stability during Dry Reforming of Methane

Highly Dispersed Ni Nanoparticles Supported by Porous Al2O3 Rods for Catalytic Dry Reforming of Methane

Highly Stable Ni−B/Honeycomb−Structural Al2O3 Catalysts for Dry Reforming of Methane

Highly dispersed Fe-decorated Ni nanoparticles prepared by atomic layer deposition for dry reforming of methane

Effect of Interstitial Carbon Atoms in Core-Shell Ni3ZnC0.7/Al2O3 Catalyst for High-Performance Dry Reforming of Methane

Nickel Catalyst with Atomically-Thin Meshed Cobalt Coating for Improved Durability in Dry Reforming of Methane

Spherical Ni Nanoparticles Supported by Nanosheet-Assembled Al2O3 for Dry Reforming of CH4: Elucidating the Induction Period and Its Excellent Resistance to Coking.

Unbounding the Future: Designing NiAl‐based Catalysts for Dry Reforming of Methane

Highly Dispersed Ni Nanoparticles Confined in Mesoporous SBA-15 for Methane Dry Reforming with Improved Coke Resistance and Stability

Bi- and Trimetallic Ni Catalysts over Al2o3 and Al2o3-Mox (M = Ce or Mg) Oxides for Methane Dry Reforming: Au and Pt Additive Effects

Controllable Preparation of Nano-Ni to Eliminate Step Edges of Carbon Deposition on Ni-Based Catalysts for Methane Dry Reforming

Modulating Proportion of Ni0 Species Stabilized by Ni2+ on Ni-MgO Catalyst with Superior Stability for Dry Reforming of Methane

Dry reforming of methane for syngas production over noble metals modified M-Ni@S-1 catalysts (M = Pt, Pd, Ru, Au)

Performance and Stability in CO2 Reforming of Methane over Neodymium Nickel Oxide Composite Catalysts

Reveal and Correlate Working Geometry and Surface Chemistry of Ni Nanocatalysts in CO2 Reforming of Methane

NixAl1O2-δ Mesoporous Catalysts for Dry Reforming of Methane: the Special Role of NiAl2O4 Spinel Phase and Its Reaction Mechanism

Highly dispersed Ni/Al2O3 catalysts for dry reforming of methane prepared by alkaline-induced adsorption process