Abstract:An electromechanically-coupled micro-contact resistance measurement system is built to mimic the contact process during fatigue testing of nanoscale-thickness interconnects using multiple probe methods. The design combines an optical microscope, high-resolution electronic balance, and micromanipulator-controlled electric probe, and is coupled with electrical measurements to investigate microscale contact physics. Experimental measurements are performed to characterize the contact resistance response of the gold nanocrystalline pad of a 35-nm-thick interconnect under mechanical force applied by a tungsten electrode probe. Location of a stable region for the contact resistance and the critical contact force provides better understanding of micro-contact behavior relative to the effects of the contact force and the nature of the contact surface. Increasing contact temperature leads to reduced contact resistance, softens the pad material, and modifies the contact surface. The stability of both contact resistance and interconnect resistance is studied under increasing contact force. Major fluctuations emerge when the contact force is less than the critical contact force, which shows that temporal contact resistance will affect interconnect resistance measurement accuracy, even when using the four-wire method. This performance is demonstrated experimentally by heating the Au line locally with a laser beam. Finally, the contact resistances are calculated using the LET (Li–Etsion–Talke) model together with combined Holm and Sharvin theory under various contact forces. Good agreement between the results is obtained. This research provides a way to measure change in interconnect line resistance directly under a stable contact resistance regime with a two-wire method that will greatly reduce the experimental costs.

Scanning probe microscopy imaging of metallic nanocontacts

Non-contact Local Conductivity Measurement of Metallic Nanowires Based on Semi-Near-field Reflection of Microwave Atomic Force Microscopy

Formation of Metallic Micro/Nanomaterials by Utilizing Migration Phenomena and Techniques for Their Applications

Electrokinetics In Micro-Channeled Cantilevers: Extending The Toolbox For Reversible Colloidal Probes And Afm-Based Nanofluidics

Feedback-controlled electromigration for the fabrication of point contacts

Imaging Simulation of Charged Nanowires in TEM with Large Defocus Distance.

In situ electron microscopy four-point electromechanical characterization of freestanding metallic and semiconducting nanowires

J212015 Quantitative Evaluation of Conductivity of Metallic Nanowires by Microwave Atomic Force Microscopy

Electromigration-Induced Evolution of Micromorphology and Electrical Properties in Gold Nanowires: Implications for Nanoelectronics

Contacting individual Fe(110) dots in a single electron-beam lithography step

Manipulation of Metallic and Semiconducting Nanowires with FETEM

Characterization of Micro-Contact Resistance Between A Gold Nanocrystalline Line and A Tungsten Electrode Probe in Interconnect Fatigue Testing

Robust Ohmic contact junctions between metallic tips and multiwalled carbon nanotubes for scanned probe microscopy

Contactless Characterization of Electronic Properties of Nanomaterials Using Dielectric Force Microscopy

AFM Manipulation of Gold Nanowires To Build Electrical Circuits

Fabrication of nanostructure on Au nano-film by nanosecond laser coupled with cantilevered scanning near-field optical microscopy probe

Nanofabrication of the gold scanning probe for the STM-SECM coupling system with nanoscale spatial resolution

Electron-beam lithography of nanostructures at the tips of scanning probe cantilevers

Electrical transport characteristics of atomic contact and nanogap dynamically formed by electromigration

Atomic-Scale Investigation of Electromigration with Different Directions of Electron Flow into High-Density Nanotwinned Copper through In Situ HRTEM

Local probing of the field emission stability of vertically aligned multiwalled carbon nanotubes