Abstract:C/Cx-SiCy composites are one of the most promising counterparts of C/C composites as they maintain the mechanical strength of C/C composites while providing excellent anti-ablation properties at the same time. This paper reports that the composites could exhibit even better anti ablation properties after heat treatment. The materials were heat-treated and then tested with a thin-blade oxyacetylene torch without the protection of any coatings. The 1600 °C heat-treated thin-blade specimen could sustain the ablation of the oxyacetylene torch with a temperature of 1776 °C (80 °C higher than the original material without heat treatment) and a lower liner ablation rate (1.31 μm/s) than the original material (1.66 μm/s). An extreme ablation test was also conducted at around 2400 °C, and the 1600 °C heat-treated specimen exhibited a lower linear ablation rate (13 μm/s) than the original specimen (47 μm/s). The influence of the heat treatment on the crystallinity of the matrix is studied with the additional help of Raman spectroscopy and XPS. The ablation mechanism is discussed in detail, and the fluent condition of the thin-blade specimen is simulated. The paper also reports a different ablation behavior of the 1600 °C heat-treated specimen from the material without heat treatment to explain their excellent ablation property.

Ablation mechanism of AlSi/graphite dissipative heat protective composites under an oxy-acetylene torch

Ablation mechanisms of interpenetrating Al20Si/graphite composites

Ablation behaviour of interpenetrating Al/graphite composites

Ablation Mechanism of AlSiB-C/C Composites under an Oxy-Acetylene Torch

Ablation of Al2O3f/Al2O3 Composites under an Oxyacetylene Torch Flame

Microstructure and ablation mechanism of graphite/SiC composites under oxy-acetylene flame

Microstructure and Ablation Behavior of SiMo/graphite Composites with Excellent Short-Time Ablation Resistance

Ablation Behaviors and Mechanism of ZrC-SiC-Si/SiC-Si Double-Layered Coatings on C/C Composite under Plasma Flame at 3000 °C

Ablation Mechanism of Carbon/Carbon Composites Modified by HfC–SiC in Two Conditions under Oxyacetylene Torch

The influence of heat treatment on the ablation behavior of the C/Cx-SiCy composites tested by thin-blade under oxyacetylene torch

Effects of SiC Addition on the Ablation Properties of C/C Composites in Different Heat Fluxes under Oxyacetylene Torch

Ablation behavior and mechanisms of ZrC-SiC-MoSi2 coated C/C-SiC-ZrC ceramic matrix composites under oxyacetylene torch

Ablation Behavior and Mechanism of C/C–ZrC–SiC Composites under an Oxyacetylene Torch at 3000°C

Effect of heat flux on ablation behaviour and mechanism of C/C-ZrB2-SiC composite under oxyacetylene torch flame

Ablation Behavior of Y2SiO5/SiC Coating for C/C Composites under Oxyacetylene Torch

Long-term ablation mechanisms of the YB4-Al2O3-Si3N4 modified Cf/HfC-SiC composites at 2600 °C

Cyclic ablation behavior of C/C–ZrC–SiC composites under oxyacetylene torch

Effect of surface ablation products on the ablation resistance of C/C-SiC composites under oxyacetylene torch

Effects of in Situ Amorphous Graphite Coating on Ablation Resistance of Sic Fiber Reinforced Sibcn Ceramics in an Oxyacetylene Flame

Ablation Mechanism and Properties of Silica Fiber-Reinforced Composite Upon Oxyacetylene Torch Exposure

Ablation behavior of graphite/SiO2 composite irradiated by high-intensity continuous laser