Abstract:For decades, researchers have been concerned about the formability of manufactured wrought cast iron, with brittleness being a major issue in these alloys. To address this, the ferrite phase has been identified as a suitable matrix for cast iron deformation due to its ability to provide satisfactory ductility and avoid brittle limitations. In this study, machined parts of ductile cast iron were subjected to an annealing process at approximately 900°C for 1 h before undergoing hot plastic deformation with varying degrees of reduction. The deformation was carried out using a cylinder-covered hot compression (CCC or CCHC) technique. The primary objective of this study is to gain a microscopic understanding of hot plastically deformed ductile cast iron and propose a mathematically formulated flow strain that takes into account the contributions of the microstructure's constituent phases. This analysis aims to provide a comprehensive characterization of deformed graphite within the microstructure. Optical microscopy (OM) and scanning electron microscopy (SEM) were employed to obtain results for the characterization. The findings revealed that as the reduction increased, spheroidal graphite tended to transform into a lamellar structure, resulting in diverse properties. Additionally, a microhardness test was conducted to assess the variation in mechanical properties throughout each deformation step.

The coupling mechanism of shrinkage defects and graphite on the corrosion resistance of ductile iron

Corrosion Development of Carbon Steel Grids and Shear Connectors in Cracked Composite Beams Exposed to Wet-Dry Cycles in Chloride Environment.

Corrosion Damages of Reinforced Concrete Characterized by X-ray CT and DVC Techniques

Comprehending the coupled effect of multiple microstructure defects on the passive film features and pitting behavior of UNS S32101 in simulated seawater

Synchrotron Measurements of Local Microstructure and Residual Strains in Ductile Cast Iron

On the Morphology Variation of Graphite in Ductile Cast Iron through Severe Plastic Deformation

Corrosion behavior and mechanism of ductile iron with different degrees of deterioration of cement mortar lining in reclaimed water pipelines

Corrosion Mechanisms of Ductile Iron Pipes in Water Distribution System: Impacts of Ionic Strength and Cement Mortar Lining Coverage

Mechanistic insights into early stages of iron corrosion under electrochemical conditions: A DFT study

Charge Transfer Mechanism of Hydrogen-Induced Intergranular Embrittlement of Iron

Role of Cr on the interfacial bonding, mechanical, and electrochemical corrosion properties of Cu matrix composites co-reinforced by Al2O3 whisker and graphene: combined experiments and first-principles calculations

Chemical-Reaction-Induced deformation of Body-Centered cubic iron in supercritical water leading to high risk of cleavage Fracture: A reactive Molecular dynamics study

Steel reinforcement corrosion in strain hardening cementitious composites (SHCC): the role of multiple microcracks and surface impregnation

Corrosion of high-strength steel in 3.5% NaCl solution under hydrostatic pressure: understanding electrochemical corrosion with tensile stress coupling

Shrinkage Behaviour of Spheroidal Graphite Cast Iron in Green and Dry Sand Molds for the Benchmarking of Solidification Simulation

Internal Porosity Defects in Ductile Cast Irons

Investigation of thermal aging damage mechanism of the Cast Duplex Stainless Steel

Mechanisms and kinetic model for steel corrosion in unsaturated cementitious materials

Unlocking the influence of microstructural evolution on hardness and pitting corrosion in duplex stainless welded joints

Infiltration behavior of copper melt into porous graphite and saturation improvement by WC particles doping

Corrosion behavior of X80 pipeline steel local defect pits under static liquid film