Abstract:The core used to build power inductors and transformers are soft magnetic materials. When there is alternating external field, the magnetic moments rotate and consume energy, which is the core loss. The core loss depends on the AC flux frequency, amplitude, waveform, DC bias and temperature. These dependences are nonlinear and difficult to predict. How to measure, model and analyze the core loss is a challenge for decades. In this dissertation, two new core loss measurement methods are introduced first. These two methods use the reactive cancellation concept to reduce the sensitivity to phase discrepancy, which will destroy the accuracy in classic two-winding method for high frequency high quality factor sample measurements. By using the new measurement techniques the accuracy can be improved by several orders. The first is for sinusoidal waveforms, and the second is for non-sinusoidal wave. The new methods enable high frequency core loss characterization capability, which will help scientists and engineers on material research and inductor/transformer design. Measurement examples, considerations and error analysis are demonstrated and discussed in detail. With the measurement techniques, the core loss under rectangular AC voltage and DC bias current are investigated. A new core loss model named rectangular extension Steinmetz equation (RESE) is proposed based on the measurement results. The new iii model is shown to be more accurate than the existing core loss models. Several commercially available MnZn ferrites are characterized and modeled. Other than conventional MnZn ferrite materials, three commercial LTCC ferrite materials are characterized for integrated power supply applications. Based on characterized properties of these LTCCs, a group of new LTCC ferrites are fabricated and tested. The new LTCC is fabricated by laminating commercial LTCC tapes and co-firing. The new LTCC is demonstrated to have over 50% more inductance over the commercial LTCC materials. This work indicates that the power electronics engineers should work with material engineers to get the optimum material for a given application. In the last part, the core loss of the partially saturated lateral flux planar inductor is analyzed. The challenge of the analysis is the complexity of the distribution of bias field and flux density in a highly biased planar inductor. Each point in the core is working at different excitation and bias condition, and the core loss density is very non-uniform. The proposed method combines the characterization tested in previous chapters and the commercial finite element tool. Experiments verified that the calculation errors are within about 10%. In conclusion, the research in this dissertation proposed a complete solution to measure, model and analyze the high frequency core loss. This solution will not only facilitate fundamental research on physics understanding and material innovation, but also development of power electronics and RF applications.

Core Energy Capacitance of NiZn Inductors

Electrical Modeling of Multi-Walled Carbon Nanotube (Mwcnt)-Based Capacitors for High-Density RF Integration

Evaluation of 3D Printed Cobalt Iron Cores for Filter Inductors

A Study of Flux Distribution and Impedance in Solid and Laminar Ferrite Cores

Complex Circuit Model for RF Inductors

Increase High Frequency Impedance of Ferrite Toroid Inductors Based on Electromagnetic Energy Analysis

The design and fabrication of LTCC chip inductors for high frequency applications based on barium ferrites

On-Chip Integrated Inductors with Ni-Zn-Cu-Fe and Y-Bi-Fe Ferrite Thin-films for RF IC

High Frequency Magnetic Core Loss Study

Modeling Methodology of Magnetic Toroidal Cores for 3-D FEM Full-Wave Simulation up to 100 MHz

Design and Analysis of Vertical Nanoparticles-Magnetic-Cored Inductors for RF ICs

Soft magnetic properties of Fe-Ni powder cores in the high frequency range

Finite Element Simulation of Electromagnetic Properties of Ferrite Material

Magnetic film inductors for RF IC

Modeling and Parameter Sensitivity Analysis of Inductor Used Multi-material Powder Core

Influence of Zinc Concentration on Structure, Complex Permittivity and Permeability of Ni–Zn Ferrites at High Frequency

On-Chip Integrated Inductors with Ferrite Thin-Films for RF IC

Ni-Zn Ferrite Film Coated On-Chip Rf Inductor Fabricated by A Novel Powder-Mixed-Photoresist Coating Technique

Modeling and Optimization of BOOST Inductor Used Multi-Material Powder Core

The Magnetized Capacitance, First Resonant Frequency, and Electromagnetic Analysis of Inductors With Ferrite Cores

Preparation and electromagnetic properties of NiCuZn ferrites and multilayer chip inductors