Abstract:The core used to build power inductors and transformers are soft magnetic materials. When there is alternating external field, the magnetic moments rotate and consume energy, which is the core loss. The core loss depends on the AC flux frequency, amplitude, waveform, DC bias and temperature. These dependences are nonlinear and difficult to predict. How to measure, model and analyze the core loss is a challenge for decades. In this dissertation, two new core loss measurement methods are introduced first. These two methods use the reactive cancellation concept to reduce the sensitivity to phase discrepancy, which will destroy the accuracy in classic two-winding method for high frequency high quality factor sample measurements. By using the new measurement techniques the accuracy can be improved by several orders. The first is for sinusoidal waveforms, and the second is for non-sinusoidal wave. The new methods enable high frequency core loss characterization capability, which will help scientists and engineers on material research and inductor/transformer design. Measurement examples, considerations and error analysis are demonstrated and discussed in detail. With the measurement techniques, the core loss under rectangular AC voltage and DC bias current are investigated. A new core loss model named rectangular extension Steinmetz equation (RESE) is proposed based on the measurement results. The new iii model is shown to be more accurate than the existing core loss models. Several commercially available MnZn ferrites are characterized and modeled. Other than conventional MnZn ferrite materials, three commercial LTCC ferrite materials are characterized for integrated power supply applications. Based on characterized properties of these LTCCs, a group of new LTCC ferrites are fabricated and tested. The new LTCC is fabricated by laminating commercial LTCC tapes and co-firing. The new LTCC is demonstrated to have over 50% more inductance over the commercial LTCC materials. This work indicates that the power electronics engineers should work with material engineers to get the optimum material for a given application. In the last part, the core loss of the partially saturated lateral flux planar inductor is analyzed. The challenge of the analysis is the complexity of the distribution of bias field and flux density in a highly biased planar inductor. Each point in the core is working at different excitation and bias condition, and the core loss density is very non-uniform. The proposed method combines the characterization tested in previous chapters and the commercial finite element tool. Experiments verified that the calculation errors are within about 10%. In conclusion, the research in this dissertation proposed a complete solution to measure, model and analyze the high frequency core loss. This solution will not only facilitate fundamental research on physics understanding and material innovation, but also development of power electronics and RF applications.

Modeling and Parameter Sensitivity Analysis of Inductor Used Multi-material Powder Core

Modeling and Optimization of BOOST Inductor Used Multi-Material Powder Core

Calculation Method for Inductance Value of Multi-Material Powder Cores Inductor Considering Their DC Superimposition Characteristic

A Compact Circuit Model of On-Chip Multi-layer Spiral Inductors on Silicon Substrate

A Scalable Model of On-chip Inductor Including Tunable Dummy Metal Density Factor

Multi-field Coupling Model of Embedded Giant Magnetostrictive Components Optimization

Development of an Inductor Design Tool Based on Multi-Objective Optimization and Finite Element Simulation

Modeling and Design of Integrated Inductor and Transformer Considering Superposed Flux Density in On-Board-Charger

Two-Dimensional Winding Loss Analytical Model for High-Frequency Multilayer Air-Core Planar Inductor

Modeling and optimization of magnetic core TSV-inductor for on-chip DC-DC converter

A Multi-Function Planar Inductor Based on 3D Printing and Its Optimization

Precise Parameterized Modeling of Coil Inductance in Wireless Power Transfer Systems

Precise Modeling for the Inductance of Rounded Rectangular Coils in Wireless Power Transfer Systems

Low Loss Non Air Gap Multi-Permeability Planar Inductor Design for Totem-Pole PFC

A new model for designing multi-hole multi-permeability nonlinear LTCC inductors

A New Model for Designing Multiwindow Multipermeability Nonlinear LTCC Inductors

Modeling of Magnetic Elements Including Losses—Application to Variable Inductor

High Frequency Magnetic Core Loss Study

Design of Ultrathin Ltcc Coupled Inductors for Compact Dc/Dc Converters

Modeling of Litz-Wire DD Coil With Ferrite Core for Wireless Power Transfer System

Analysis and Equivalent-Circuit Model for CMOS On-Chip Multiple Coupled Inductors in the Millimeter-Wave Region