Abstract:Carbon nanotubes form a complex network in nanocomposites. In the network, the configuration of the nanotubes is various. A carbon nanotube may be curled or straight, and it may be parallel or crossed to another. As a result, carbon nanotube-based composites exhibit integrated characteristics of inductor, capacitor and resistor. In this work, it is hypothesised that carbon nanotube-based composites all adhere to a RLC interior circuit. To verify the hypothesis, three different composites, viz multi-walled carbon nanotube/polyvinylidene fluoride (MWCNT/ PVDF), multi-walled carbon nanotube/epoxy (MWCNT/EP), multi-walled carbon nanotube/ polydimethylsiloxane (MWCNT/PDMS) were fabricated and tested. The resistances and the dielectric loss tangent (tan delta) of the materials were measured in direct and alternating currents. The measurement shows that the value of tan delta is highly affected by the volume fraction of MWCNT in the composites. The experimental results prove that the proposed RLC equivalent circuit model can fully describe the electrical properties of the MWCNT network in nanocomposites. The RLC model provides a new route to detect the inductance and capacitance of carbon nanotubes. Moreover, the model also indicates that the carbon nanotube-based composite films may be used to develop wireless strain sensors.

Electrical Modeling of Multi-Walled Carbon Nanotube (Mwcnt)-Based Capacitors for High-Density RF Integration

Circuit Modeling and Performance Analysis of Multi-Walled Carbon Nanotube Interconnects

Electrothermal investigation on through silicon multi-walled carbon nanotube via interconnects

Carbon‐Based Interconnects for RF Nanoelectronics

Comparative study on the characteristics among few-walled carbon nanotube array field-effect transistors

Modeling of Power Distribution Network Based on Multi-Walled Carbon Nanotube TSVs for 3-D ICs

Modeling of carbon nanotube (CNT) interconnects

Electromagnetic Compatibility-Oriented Study on Through Silicon Single-Walled Carbon Nanotube Bundle Via (TS-SWCNTBV) Arrays

Characterization of Single- and Multiwalled Carbon Nanotube Composites for Electromagnetic Shielding and Tunable Applications

Modeling and performance characterization of double-walled carbon nanotube array field-effect transistors

Performance analysis of multi-walled carbon nanotube based interconnects

Circuit Modeling and Time Delay Analysis of Double-Walled Carbon Nanotube Interconnects

Modeling of Carbon Nanotube Interconnects and Comparative Analysis with Cu Interconnects

High-Frequency Analysis of Cu-Carbon Nanotube Composite Through-Silicon Vias

High-Frequency Modeling of On-Chip Coupled Carbon Nanotube Interconnects for Millimeter-Wave Applications

Carbon Nanotube Capacitors Arrays Using High-K Dielectrics

High-Performance Resonator Based on Multiwalled Carbon Nanotube (Mwcnt)

Thermal Modeling of an Electrolytic Capacitor Bank

Unified equivalent circuit model for carbon nanotube-based nanocomposites.

Numerical Modeling and Experimental Investigation of Resonance Properties of Microwave Capacitors

A Fully Anlytical Model for Carbon Nanotube FETs including Quantum Capacitances and Electrostatics