Abstract:We proposed to use N2O instead of CO2 as an oxygen source to prepare n‐type nc‐SiOx:H layers for SHJ solar cells. With the advantage of low bonding energy, N2O decomposes more easily to produce O‐radicals into nc‐SiOx:H network, thus improving the deposition rate, optical transmittance, and crystallinity of nc‐SiOx:H layers. The advantage of employing an n‐type hydrogenated nanocrystalline silicon oxide (nc‐SiOx:H) layer as the front surface field (FSF) in silicon heterojunction (SHJ) solar cells is due to its low optical absorption coefficient and tunable refractive index. However, carbon dioxide (CO2) gas, one of the major precursor gases in the nc‐SiOx:H layer, deteriorates the crystallinity, which is one of the key factors affecting cell performance. Here, we successfully deposited a nc‐SiOx:H FSF layer with high crystallinity for SHJ solar cells by using nitrous oxide (N2O) as an alternative oxygen source instead of existing CO2. Compared with the use of CO2, the use of N2O as an oxygen source can achieve a 10% ~ 15% increase in the deposition rate of the nc‐SiOx:H layer, which can shorten the total processing tact‐time, thus having the potential to reduce production costs in large‐scale industrial applications. The influence of N2O as an oxygen source on the film properties was also investigated. By optimizing the proportion of N2O in the precursor gases, we finally fabricated 274.5 cm2‐area SHJ solar cells with an in‐house average efficiency of 25.76%, which is approximately 0.1%abs higher than that of their reference counterparts (using CO2 as an oxygen source), and obtained a certified efficiency of 25.79% for the champion cell independently confirmed by the ISFH CalTeC in Germany.

N-type nc-SiOx:H film enables efficient and stable silicon heterojunction solar cells in sodium environment

Highly Efficient Silicon Heterojunction Solar Cells with ZnO:Al Transparent Electrode and Transition Metal Doped Indium Oxide Interfacial Layer

Balance of efficiency and stability of silicon heterojunction solar cells

Wide Bandgap P-Type Nanocrystalline Silicon Oxide As Window Layer for High Performance Thin-Film Silicon Multi-Junction Solar Cells

Using phosphorus doped hydrogenated silicon oxycarbide film as a window layer on the light entrance side of silicon heterojunction solar cells: The role of phase separation on electron transport

Development of high conducting phosphorous doped nanocrystalline thin silicon films for silicon heterojunction solar cells application

Beyond 25% efficient crystalline silicon heterojunction solar cells with hydrogenated amorphous silicon oxide stacked passivation layers for rear emitter

Nanocrystalline‐silicon hole contact layers enabling efficiency improvement of silicon heterojunction solar cells: Impact of nanostructure evolution on solar cell performance

Highly crystallized tungsten doped indium oxide film stabilizes silicon heterojunction solar cells in sodium environment

Nanocrystalline silicon thin film growth and application for silicon heterojunction solar cells: a short review

Industrial‐Scale Preparation of Nanocrystalline n‐Type Silicon Oxide Front Contacts Using N2O as an Oxygen Source for High‐Efficiency Silicon Heterojunction Solar Cells

Silicon heterojunction solar cells with up to 26.81% efficiency achieved by electrically optimized nanocrystalline-silicon hole contact layers

Heavy Boron-Doped Silicon Tunneling Inter-layer Enables Efficient Silicon Heterojunction Solar Cells

A Review: Application of Doped Hydrogenated Nanocrystalline Silicon Oxide in High Efficiency Solar Cell Devices

Crystalline Silicon Heterojunction Solar Cells with Metal Oxide Window Layers

Improved Device Performance of Si-based Heterojunction Solar Cells by Using Phosphorus Doped Si Nanocrystals Embedded in SiC Host Matrix

Transparent Conductive Oxide Sputtering Damage on Contact Passivation in Silicon Heterojunction Solar Cells with Hydrogenated Nanocrystalline Silicon

Silicon Nanocrystal Conjugated Polymer Hybrid Solar Cells with Improved Performance

Single‐Side Heterojunction Solar Cell with Microcrystalline Silicon Oxide Emitter and Diffused Back Surface Field

Microcrystalline Silicon‐carbon Alloys As Anti‐reflection Window Layers in High Efficiency Thin Film Silicon Solar Cells

Solution-processed ZnO as the efficient passivation and electron selective layer of silicon solar cells