Abstract:Silicon heterojunction (SHJ) solar cells are crystalline silicon wafer-based photovoltaic devices fabricated with thin-film deposition technology. The SHJ solar cells hold great potential for large-scale deployment for high conversion efficiencies with low-cost manufacturing. Recently Kaneka Corporation has fabricated an interdigitated-back-contact (IBC) SHJ solar cell with a certified 26.33% conversion efficiency in a large area (180.4 cm(2)), which is a world record for any 1-sun crystalline silicon wafer-based solar cell. The key feature of SHJ solar cells is the impressive highopen-circuit voltages (V-oc) achieved by the excellent amorphous/crystalline silicon interface passivation. Generally, in SHJ solar cells, the boron doped hydrogenated amorphous silicon [(p) a-Si:H] serves as hole collector and the phosphorus doped hydrogenated amorphous silicon [(n) a-Si:H] functions as electron collector. In order to improve the lateral carrier transport of these layers, transparent conductive oxides (TCOs) are usually deposited on both sides of the solar cell. Therefore the parameters such as the heterointerface passivation quality, doping concentration and thickness of the a-Si: H doped layer, and work function of the transparent conductive oxide layer are the key factors that affect the performances of SHJ solar cells. Enormous research efforts have been devoted to studying the effects of the aforementioned influencing parameters on the photovoltaic characteristics of SHJ solar cells. Some research groups have addressed the physical mechanism behind the limitation of the solar cell efficiency. Owing to the insight into the physical mechanism some guidelines for optimally designing the high-performance solar cells in future are obtained. It seems therefore important to summarize the research efforts devoted to the physical mechanism and optimal design of SHJ solar cells. In the present review, we mainly discuss three important issues: 1) the amorphous/crystalline silicon interface passivation; 2) the Schottky barrier resulting from the work function mismatch between the (p) a-Si: H doped layer and the transparent conductive oxide layer; 3) the screening length that is required to efficiently shield the parasitic opposing band from bending originating from the work function mismatch between the (p) a-Si: H doped layer and the transparent conductive oxide layer. The numerical simulation and optimal design of SHJ solar cells are analyzed, and three strategies that may improve the solar cell performances are presented: 1) a hybrid SHJ solar cell structure with a rear heterojunction emitter and a phosphorus-diffused homojunction front surface field; 2) replacing the (p) a-Si: H doped layer by higher doping efficiency microcrystalline silicon alloys such as mu c-Si:H, mu c-SiOx:H or mu c-SiCx:H; 3) replacing the (p) a-Si: H doped layer by higher work function transition metal oxides such as MoOx, WOx or VOx. Finally, the research progress and future development of SHJ solar cells are also described.

Highly Efficient Silicon Heterojunction Solar Cells with ZnO:Al Transparent Electrode and Transition Metal Doped Indium Oxide Interfacial Layer

Tantalum Doped Tin Oxide Enabled Indium-Free Silicon Heterojunction Solar Cells with Efficiency over 25%

Power conversion efficiency of 25.26% for silicon heterojunction solar cell with transition metal element doped indium oxide transparent conductive film as front electrode

ZnO-Doped In<sub>2</sub>O<sub>3</sub> Front Transparent Contact Enables >24.0% Silicon Heterojunction Solar Cells

Silicon solar cell with undoped tin oxide transparent electrode

ZnO‐doped In2O3 front transparent contact enables >24.0% silicon heterojunction solar cells

Gallium‐Doped Zinc Oxide/Tungsten‐Doped Indium Oxide Stacks with Enhanced Lateral Transport Capability for Efficient and Low‐Cost Silicon Heterojunction Solar Cells

Application of Indium Tin Oxide/Aluminum-Doped Zinc Oxide Transparent Conductive Oxide Stack Films in Silicon Heterojunction Solar Cells

Room-temperature Sputtered Tungsten-Doped Indium Oxide for Improved Current in Silicon Heterojunction Solar Cells

Silicon solar cells with bifacial metal oxides carrier selective layers

Enhancement of Short-Circuit Current Density in Silicon Heterojunction Solar Cells by Hydrogenated Multiple-Doped In2O3 Thin Films

Silicon heterojunction solar cells with up to 26.81% efficiency achieved by electrically optimized nanocrystalline-silicon hole contact layers

High‐Performance Organic‐Silicon Heterojunction Solar Cells by Using Al‐Doped ZnO As Cathode Interlayer

Damp-Heat-Stable, High-Efficiency, Industrial-Size Silicon Heterojunction Solar Cells

Modulation of the TCO/MoO x Front Contact Enables >21% High-Efficiency Dopant-Free Silicon Solar Cells

Solution-processed ZnO as the efficient passivation and electron selective layer of silicon solar cells

High-quality Industrial N-Type Silicon Wafers with an Efficiency of over 23% for Si Heterojunction Solar Cells

Physical mechanism and optimal design of silicon heterojunction solar cells

Enhancing Conductivity in Silicon Heterojunction Solar Cells with Silver Nanowire-Assisted Ti3C2Tx MXene Electrodes for Cost-Effective and Scalable Photovoltaics

GZO/IWO stacks with enhanced lateral transport capability for efficient and low cost SHJ solar cells

Monolithic perovskite/silicon tandem solar cells with optimized front zinc doped indium oxides and industrial textured silicon heterojunction solar cells